968-1D907 Part by Gap Instrument Corp with NSN 5990-00-810-9579 - Request a Quote Now

Part Number: 968-1D907

Manufacturer: gap instrument corp

NSN: 5990-00-810-9579

CAGE Code: 00607

NIIN: 008109579

Item Name : synchro transmitter

INC Code: 02073

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

FSC: 5990 Synchros and Resolvers

For competitive procurement options on part number 968-1D907 from Gap Instrument Corp (CAGE Code 00607), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 968-1D907 Details:

Part number 968-1D907 is manufactured by Gap Instrument Corp and listed with the item name Synchro Transmitter. Classified under NSN 5990-00-810-9579, the NIIN of this item is 008109579, its INC is 02073, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5990 Synchros and Resolvers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 968-1D907

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 968-1D907 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 968-1D907 with NSN 5990-00-810-9579, 5990008109579

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-810-9579 Item PartTypeName: SYNCHRO,TRANSMITTER	5990	008109579	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
968-1D907	C	9	7

Characteristics Data of NSN 5990-00-810-9579, 5990008109579

MRC	Criteria	Characteristic
AAQL	BODY STYLE	STANDARD ROUND C
ABKK	FLANGE DIAMETER	1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM
ABPA	UNDERCUT DIAMETER	0.9750 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.0500 INCHES NOMINAL
ABXF	SHAFT LENGTH	0.5450 INCHES MINIMUM AND 0.5650 INCHES MAXIMUM SINGLE SHAFT
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJVF	PHASE SHIFT ANGLE IN DEG	4.500 INPUT TO OUTPUT NOMINAL
AJVG	MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	75.00 OUTPUT
AJWQ	PILOT LENGTH	0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM
AJWR	SHOULDER LENGTH	0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM
AJXA	SPLINE TOOTH DIAMETRAL PITCH	120 SINGLE SHAFT
AKAF	SHAFT THREAD DIRECTION	RIGHT-HAND SINGLE SHAFT
CSJY	TRANSFORMATION RATIO	0.783 ROTOR TO STATOR NOMINAL
TTQY	TERMINAL TYPE AND QUANTITY	5 SCREW
AAVH	SHOULDER DIAMETER	0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
AAVL	PILOT DIAMETER	0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
ABHP	OVERALL LENGTH	2.4110 INCHES NOMINAL
ABKU	FLANGE THICKNESS	0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM
ABWV	SHAFT DIAMETER	0.1867 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM SINGLE SHAFT
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AJSL	BODY SIZE	11
AJSR	ROTOR INPUT VOLTAGE RATING IN VOLTS	115.0 NOMINAL
AJST	ROTOR INPUT CURRENT RATING	31.0 MILLIAMPERES NOMINAL
AJSV	ROTOR INPUT ELECTRICAL POWER RATING	490.0 MILLIWATTS NOMINAL
AJVL	ELECTRICAL ERROR ANGULAR RANGE IN MINUTES	-3.0 TO 3.0
AJVM	SPLINE TOOTH QUANTITY	21 SINGLE SHAFT
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.8560 INCHES NOMINAL
AJYY	SHAFT THREAD SERIES DESIGNATOR	UNF SINGLE SHAFT
AKAN	SHAFT THREAD CLASS	2A SINGLE SHAFT
CQTM	TERMINAL LOCATION	REAR
CQWQ	SHAFT THREAD LENGTH	0.2900 INCHES NOMINAL SINGLE SHAFT
CRSJ	SHAFT TYPE	SPLINE W/THREADS SINGLE SHAFT
CWBH	SHAFT NOMINAL THREAD SIZE	0.185 INCHES SINGLE SHAFT