AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number VTDX45-6A1 from General Dynamics Global Imaging (CAGE Code 10112), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number VTDX45-6A1 Details:
Part number VTDX45-6A1 is manufactured by General Dynamics Global Imaging and listed with the item name Synchro Differentia. Classified under NSN 5990-00-268-9075, the NIIN of this item is 002689075, its INC is 02071, and its NCB code is 00 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5990 Synchros and Resolvers. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-268-9075 Item PartTypeName: SYNCHRO,DIFFERENTIAL TRANSMITTER | 5990 | 002689075 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1480240 | 2 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND DOUBLE FLANGE B |
| AAVH | SHOULDER DIAMETER | 4.2500 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 1.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 7.5300 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 4.5000 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.2510 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.3500 INCHES NOMINAL SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.9700 INCHES NOMINAL SINGLE SHAFT |
| AEDC | SHAFT UNDERCUT WIDTH | 0.0700 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGRS | DISTANCE BETWEEN FLANGES | 2.2500 INCHES NOMINAL |
| AHCG | MAXIMUM TEMP RISE | 50.0 DEG CELSIUS |
| AJSL | BODY SIZE | 45 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 2.0 AMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 23.0 WATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 60.0 NOMINAL |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0 TO 18.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 4.000 INCH-OUNCES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.3130 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 1.1870 INCHES NOMINAL |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 3A SINGLE SHAFT |
| CQRG | BODY MATERIAL | ALUMINUM |
| CQTM | TERMINAL LOCATION | REAR |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | 0.2500 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND,TAPERED,THREADED,UNDERCUT SINGLE SHAFT |
| CSLT | SHAFT TAPER ANGLE IN DEG | 3.0 SINGLE SHAFT |
| CTBP | SHAFT TIP LENGTH | 0.2120 INCHES NOMINAL SINGLE SHAFT |
| CWAC | SHAFT TAPER LENGTH | 0.3750 INCHES NOMINAL SINGLE SHAFT |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| CWJD | SHAFT UNDERCUT DIAMETER | 0.2190 INCHES NOMINAL SINGLE SHAFT |
| FEAT | SPECIAL FEATURES | SHAFT TO BE FITTED WITH NO. 00 WOOD RUFF KEY WHITNEY NO. 207 |
| TEST | TEST DATA DOCUMENT | 81349-MIL-S-2335 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTIN |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SCREW |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-S-2335 GOVERNMENT SPECIFICATION |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
