AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number CX31-4N1 from General Dynamics Global Imaging (CAGE Code 10112), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number CX31-4N1 Details:
Part number CX31-4N1 is manufactured by General Dynamics Global Imaging and listed with the item name Synchro Transmitter. Classified under NSN 5990-01-093-8328, the NIIN of this item is 010938328, its INC is 02073, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5990 Synchros and Resolvers. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-01-093-8328 Item PartTypeName: SYNCHRO,TRANSMITTER | 5990 | 010938328 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 31CX4A | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND D |
| AAVH | SHOULDER DIAMETER | 2.7000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.5950 INCHES NOMINAL |
| AAZW | SECOND SHOULDER DIAMETER | 2.7500 INCHES MAXIMUM |
| AAZX | SECOND SHOULDER LENGTH | 0.3750 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 5.1150 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 3.1000 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 2.7000 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.7000 INCHES NOMINAL SINGLE SHAFT |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR,1 STATOR |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | 20.0 DEG CELSIUS |
| AJSL | BODY SIZE | 31 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 950.0 MILLIAMPERES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 8.3 WATTS NOMINAL |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 121.00 MINIMUM AND 166.00 MAXIMUM |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | 82.00 MINIMUM AND 87.00 MAXIMUM |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | 3.40 MINIMUM AND 5.90 MAXIMUM |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | 51.00 MINIMUM AND 72.00 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 1.500 INPUT TO OUTPUT MAXIMUM |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 35.00 INPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 100.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.50 INCH-OUNCES MAXIMUM |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| AJWH | SHAFT END PLAY | 0.0030 INCHES NOMINAL |
| AJWQ | PILOT LENGTH | 0.0300 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.3750 INCHES NOMINAL |
| AJWV | AFT OF FIRST FLANGE DIAMETER | 2.7500 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.3800 INCHES MAXIMUM |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.3200 INCHES MAXIMUM SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 0.783 ROTOR TO STATOR NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 16.0 OUNCES |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 16.0 OUNCES |
| FEAT | SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT 0.125 INCHES MAX |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
