AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number VTDX37-6H4 from General Dynamics Global Imaging (CAGE Code 10112), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number VTDX37-6H4 Details:
Part number VTDX37-6H4 is manufactured by General Dynamics Global Imaging and listed with the item name Synchro Differentia. Classified under NSN 5990-01-311-3710, the NIIN of this item is 013113710, its INC is 02071, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5990 Synchros and Resolvers. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-01-311-3710 Item PartTypeName: SYNCHRO,DIFFERENTIAL TRANSMITTER | 5990 | 013113710 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TDX37-6H4 | 5 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 6.0500 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 3.3900 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM SINGLE SHAFT |
| AJSP | STATOR INPUT CURRENT RATING | 550.0 MILLIAMPERES MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 50.0 MINIMUM AND 60.0 MAXIMUM |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CRSJ | SHAFT TYPE | ROUND,THREADED SINGLE SHAFT |
| AAQL | BODY STYLE | STANDARD ROUND DOUBLE FLANGE A |
| AAVH | SHOULDER DIAMETER | 3.3340 INCHES NOMINAL |
| AAVL | PILOT DIAMETER | 1.6300 INCHES MAXIMUM |
| AAZW | SECOND SHOULDER DIAMETER | 3.3700 INCHES NOMINAL |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0 TO 18.0 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0010 INCHES |
| CQRG | BODY MATERIAL | ALUMINUM |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 48.0 OUNCES |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SCREW |
| AAZX | SECOND SHOULDER LENGTH | 0.3750 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 3.6230 INCHES MINIMUM AND 3.6250 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.2460 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.7700 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGRS | DISTANCE BETWEEN FLANGES | 1.8120 INCHES NOMINAL |
| AJSL | BODY SIZE | 37 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 4.25 WATTS MAXIMUM |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 14.60 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 10.50 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 6.000 INPUT TO OUTPUT NOMINAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.50 INCH-OUNCES MAXIMUM |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 0.300 INCH-OUNCES MINIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 5 |
| AJWH | SHAFT END PLAY | 0.0010 INCHES MINIMUM AND 0.0050 INCHES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0200 INCHES MINIMUM AND 0.0400 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.7850 INCHES NOMINAL |
| AJWW | AFT OF SECOND FLANGE DIAMETER | 3.3750 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.7680 INCHES NOMINAL |
| CQWQ | SHAFT THREAD LENGTH | 0.3020 INCHES MINIMUM AND 0.3220 INCHES MAXIMUM SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.5000 INCHES NOMINAL |
| CSJY | TRANSFORMATION RATIO | 1.000 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 3.0000 INCHES NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 48.0 OUNCES |
| FEAT | SPECIAL FEATURES | SHAFT IS ALSO SLOTTED,0.032 IN. WIDE BY 0.047 IN. DEEP;SHAFT RADIAL PLAYTEST POINT JAA0.125 |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
