LSCP930071 Part by General Dynamics Land Systems Inc with NSN 2510-01-508-2993 - Request a Quote Now

Part Number: LSCP930071

Manufacturer: general dynamics land systems inc

NSN: 2510-01-508-2993

CAGE Code: 01417

NIIN: 015082993

Item Name : tread metallic nons

INC Code: 11472

Country: USA

NCB Code: 01

FSG: 25 Vehicular Equipment Components

FSC: 2510 Vehicular Cab Body and Frame Structural Components

For competitive procurement options on part number LSCP930071 from General Dynamics Land Systems Inc (CAGE Code 01417), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number LSCP930071 Details:

Part number LSCP930071 is manufactured by General Dynamics Land Systems Inc and listed with the item name Tread Metallic Nons. Classified under NSN 2510-01-508-2993, the NIIN of this item is 015082993, its INC is 11472, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 25 Vehicular Equipment Components and Class (FSC) 2510 Vehicular Cab Body and Frame Structural Components. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for LSCP930071

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part LSCP930071 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number LSCP930071 with NSN 2510-01-508-2993, 2510015082993

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
2510-01-508-2993 Item PartTypeName: TREAD,METALLIC,NONSKID	2510	015082993	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
LSCP930071	5	2	3

Characteristics Data of NSN 2510-01-508-2993, 2510015082993

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	29.070 INCHES NOMINAL
ABKW	OVERALL HEIGHT	0.250 INCHES MINIMUM AND 1.250 INCHES MAXIMUM
ABMK	OVERALL WIDTH	12.250 INCHES MINIMUM AND 15.250 INCHES MAXIMUM
AGAV	III END ITEM IDENTIFICATION	5420-01-430-5403 BRIDGE LAUNCHING CARRIER; W/S ABRAMS TANK
AMSP	BASIC MATERIAL	ALUMINUM ALLOY
AXGY	MOUNTING METHOD	DRILLED HOLE
BJST	MOUNTING FEATURE	INCLUDED
FEAT	SPECIAL FEATURES	ITEM HAS 1 INCH OFF-SET ON ONE END WITH 3 INCH NOTCH CUT FROM WIDTH. SURFACE FINISH IS PAINT PER MIL-STD-171 FINISH 7.3.1 IAW 19207-12344345
STYL	STYLE DESIGNATOR	KNURLED
SUPP	III SUPPLEMENTARY FEATURES	THIS ITEM IS MADE OF 4 PLATES WELDED TOGETHER; 10 PLAIN HOLES 0.50 DIAMETER, 7 HOLES 0.375-16 UNC-2B WITH PADS AND INSERTS.