X900182 4 Part by General Dynamics Land Systems Inc with NSN 5905-00-073-8693 - Request a Quote Now

Part Number: X900182 4

Manufacturer: general dynamics land systems inc

NSN: 5905-00-073-8693

CAGE Code: 05257

NIIN: 000738693

Item Name : resistor variable wire wound pre

INC Code: 37408

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

FSC: 5905 Resistors

For competitive procurement options on part number X900182 4 from General Dynamics Land Systems Inc (CAGE Code 05257), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number X900182 4 Details:

Part number X900182 4 is manufactured by General Dynamics Land Systems Inc and listed with the item name Resistor Variable Wire Wound Pre. Classified under NSN 5905-00-073-8693, the NIIN of this item is 000738693, its INC is 37408, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5905 Resistors. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for X900182 4

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part X900182 4 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number X900182 4 with NSN 5905-00-073-8693, 5905000738693

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-00-073-8693 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE	5905	000738693		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
7233-526-2	2	2	5

Characteristics Data of NSN 5905-00-073-8693, 5905000738693

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	2
AAQL	BODY STYLE	CYLINDRICAL SERVO MOUNTED
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
AAVL	PILOT DIAMETER	0.6250 INCHES MAXIMUM
AAVM	PILOT LENGTH	0.0620 INCHES NOMINAL
ABPA	UNDERCUT DIAMETER	0.625 INCHES MAXIMUM
ABPC	UNDERCUT WIDTH	0.0620 INCHES NOMINAL
ABPM	BODY DIAMETER	0.875 INCHES NOMINAL
ABUF	ANGLE OF MOUNTING HOLE IN DEG	90.0
ABVJ	ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG	120.0
ABWV	SHAFT DIAMETER	0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM
ABXF	SHAFT LENGTH	0.312 INCHES NOMINAL
ADAQ	BODY LENGTH	2.995 INCHES MAXIMUM
AECZ	MOUNTING LIP DIAMETER	0.8750 INCHES NOMINAL
AEDA	MOUNTING LIP DEPTH	0.0620 INCHES NOMINAL
AEDE	MOUNTING HOLE/STUD CIRCLE DIAMETER	0.750 INCHES NOMINAL
AEDX	SHAFT STYLE	ROUND,SLOTTED
AEDZ	SHAFT BEARING TYPE	BALL
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	3600.0 NOMINAL
AEFK	MAXIMUM STARTING TORQUE	1.20 INCH-OUNCES
AEFL	MAXIMUM RUNNING TORQUE	1.00 INCH-OUNCES
AEFM	MAXIMUM STOP TORQUE	128.00 INCH-OUNCES
AEFY	SHAFT END PLAY	0.004 INCHES
AEFZ	SHAFT RUNOUT	0.001 INCHES
AEGA	LATERAL RUNOUT	0.003 INCHES
AEGB	PILOT DIAMETER RUNOUT	0.0015 INCHES
AEGC	SHAFT RADIAL PLAY	0.002 INCHES
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGY	MOUNTING METHOD	CLAMP RING
CQCC	ELECTRICAL RESISTANCE PER SECTION	1.0 KILOHMS ALL SECTIONS
CQCH	TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION	2666.0 ALL SECTIONS
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	3600.0 NOMINAL
CQFL	FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.15 TO 0.15 ALL SECTIONS
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	85.0 ALL SECTIONS
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR ALL SECTIONS
CRGM	FUNCTION CONFORMITY PER SECTION	ALL SECTIONS ABSOLUTE LINEARITY
CRJS	FIXED TAP QUANTITY PER SECTION	1 ALL SECTIONS
CRKS	TAP LOCATION TOLERANCE PER SECTION	-2.0 TO 2.0 DEG ANGULAR ROTATION ALL SECTIONS
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-3.0 TO 3.0 ALL SECTIONS
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
CSBX	FUNCTION CHARACTERISTIC PER SECTION	ALL SECTIONS LINEAR
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	25.0 ALL SECTIONS
TTQY	TERMINAL TYPE AND QUANTITY	8 TURRET