710-077NFA20B16C16D16B Part by Glenair Inc with NSN 5975-01-482-4574 - Request a Quote Now

Part Number: 710-077NFA20B16C16D16B

Manufacturer: glenair inc

NSN: 5975-01-482-4574

CAGE Code: 06324

NIIN: 014824574

Item Name : wye electrical conduit

INC Code: 10234

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

FSC: 5975 Electrical Hardware and Supplies

For competitive procurement options on part number 710-077NFA20B16C16D16B from Glenair Inc (CAGE Code 06324), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 710-077NFA20B16C16D16B Details:

Part number 710-077NFA20B16C16D16B is manufactured by Glenair Inc and listed with the item name Wye Electrical Conduit. Classified under NSN 5975-01-482-4574, the NIIN of this item is 014824574, its INC is 10234, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5975 Electrical Hardware and Supplies. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 710-077NFA20B16C16D16B

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 710-077NFA20B16C16D16B with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 710-077NFA20B16C16D16B with NSN 5975-01-482-4574, 5975014824574

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5975-01-482-4574 Item PartTypeName: WYE,ELECTRICAL CONDUIT	5975	014824574		P	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
			A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
710-077NFA20B16C16D16B	5	2	3

Characteristics Data of NSN 5975-01-482-4574, 5975014824574

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A FIRST END"
AAJD	THREAD CLASS	2A FOURTH END"
AAJD	THREAD CLASS	2A SECOND END"
AAJD	THREAD CLASS	2A THIRD END"
AAJF	THREAD DIRECTION	RIGHT-HAND FIRST END"
AAJF	THREAD DIRECTION	RIGHT-HAND FOURTH END"
AAJF	THREAD DIRECTION	RIGHT-HAND SECOND END"
AAJF	THREAD DIRECTION	RIGHT-HAND THIRD END"
ABEX	DEFLECTION ANGLE	45.0 DEGREES"
AELS	CONDUIT TYPE ACCOMMODATED	ANY ACCEPTABLE SINGLE END"
AHSJ	LEG LENGTH	1.700 INCHES MAXIMUM SINGLE END"
APTD	END TYPE	EXTERNAL THREAD SINGLE END"
CQJX	NOMINAL THREAD SIZE	0.750 INCHES FOURTH END"
CQJX	NOMINAL THREAD SIZE	0.750 INCHES SECOND END"
CQJX	NOMINAL THREAD SIZE	0.750 INCHES THIRD END"
CQJX	NOMINAL THREAD SIZE	0.875 INCHES FIRST END"
CQRN	THREAD QUANTITY	20 PER INCH FIRST END"
CQRN	THREAD QUANTITY	20 PER INCH FOURTH END"
CQRN	THREAD QUANTITY	20 PER INCH SECOND END"
CQRN	THREAD QUANTITY	20 PER INCH THIRD END"
MATT	MATERIAL	COPPER ALLOY"
SFTT	SURFACE TREATMENT	CADMIUM AND NICKEL"
STYL	STYLE DESIGNATOR	BRANCHED"
THSD	THREAD SERIES DESIGNATOR	UNEF FIRST END"
THSD	THREAD SERIES DESIGNATOR	UNEF FOURTH END"
THSD	THREAD SERIES DESIGNATOR	UNEF SECOND END"
THSD	THREAD SERIES DESIGNATOR	UNEF THIRD END"
AAJD	THREAD CLASS	2A FIRST END"
AAJD	THREAD CLASS	2A FOURTH END"
AAJD	THREAD CLASS	2A SECOND END"
AAJD	THREAD CLASS	2A THIRD END"
AAJF	THREAD DIRECTION	RIGHT-HAND FIRST END"
AAJF	THREAD DIRECTION	RIGHT-HAND FOURTH END"
AAJF	THREAD DIRECTION	RIGHT-HAND SECOND END"
AAJF	THREAD DIRECTION	RIGHT-HAND THIRD END"
ABEX	DEFLECTION ANGLE	45.0 DEGREES"
AELS	CONDUIT TYPE ACCOMMODATED	ANY ACCEPTABLE SINGLE END"
AHSJ	LEG LENGTH	1.700 INCHES MAXIMUM SINGLE END"
APTD	END TYPE	EXTERNAL THREAD SINGLE END"
CQJX	NOMINAL THREAD SIZE	0.750 INCHES FOURTH END"
CQJX	NOMINAL THREAD SIZE	0.750 INCHES SECOND END"
CQJX	NOMINAL THREAD SIZE	0.750 INCHES THIRD END"
CQJX	NOMINAL THREAD SIZE	0.875 INCHES FIRST END"
CQRN	THREAD QUANTITY	20 PER INCH FIRST END"
CQRN	THREAD QUANTITY	20 PER INCH FOURTH END"
CQRN	THREAD QUANTITY	20 PER INCH SECOND END"
CQRN	THREAD QUANTITY	20 PER INCH THIRD END"
MATT	MATERIAL	COPPER ALLOY"
SFTT	SURFACE TREATMENT	CADMIUM AND NICKEL"
STYL	STYLE DESIGNATOR	BRANCHED"
THSD	THREAD SERIES DESIGNATOR	UNEF FIRST END"
THSD	THREAD SERIES DESIGNATOR	UNEF FOURTH END"
THSD	THREAD SERIES DESIGNATOR	UNEF SECOND END"
THSD	THREAD SERIES DESIGNATOR	UNEF THIRD END"