AP1-1-8-220 Part by Honeywell Sensing And Control with NSN 5905-00-712-8617 - Request a Quote Now

Part Number:  AP1-1-8-220
CAGE Code:  94603
NIIN:  007128617
Item Name :  resistor variable w
INC Code:  37406
Country:  USA
NCB Code:  00

For competitive procurement options on part number AP1-1-8-220 from Honeywell Sensing And Control (CAGE Code 94603), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number AP1-1-8-220 Details:

Part number AP1-1-8-220 is manufactured by Honeywell Sensing And Control and listed with the item name Resistor Variable W. Classified under NSN 5905-00-712-8617, the NIIN of this item is 007128617, its INC is 37406, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5905 Resistors. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for AP1-1-8-220

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Get Started on Procurement

  1. Complete an RFQ Form: Fill out this form for part AP1-1-8-220 with details on your operational requirements, including your target quantity and expected turnaround time.
  2. Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
  3. Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number AP1-1-8-220 with NSN 5905-00-712-8617, 5905007128617

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-712-8617

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

59050071286170NA
CIICHCCESDPMICCriticalityENAC
UAU
Part NumberISCRNVCRNCCHCCMSDSSADC
129677-01627

Characteristics Data of NSN 5905-00-712-8617, 5905007128617

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH2.187 INCHES NOMINAL
ABPMBODY DIAMETER1.312 INCHES MAXIMUM
ABXFSHAFT LENGTH0.797 INCHES MINIMUM AND 0.828 INCHES MAXIMUM
ADAPMOUNTING BUSHING LENGTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
ADAQBODY LENGTH1.000 INCHES MAXIMUM
ADAVOVERALL DIAMETER1.312 INCHES MAXIMUM
AEDQUNDERCUT DIAMETER0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM
AEDXSHAFT STYLEROUND,UNDERCUT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION315.0 NOMINAL
AEFMMAXIMUM STOP TORQUE128.00 INCH-OUNCES
AEFNNONTURN DEVICE LOCATIONNONTURN DEVICE 168 DEG CW FROM 12 OCLOCK
AJYNSCREW THREAD DIAMETER0.375 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
CQCCELECTRICAL RESISTANCE PER SECTION10.000 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG325.0 MINIMUM
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
TESTTEST DATA DOCUMENT35351-128666 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI
TTQYTERMINAL TYPE AND QUANTITY3 TAB,SOLDER LUG
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
ABWVSHAFT DIAMETER0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
AEFDACTUATOR TYPESINGLE SHAFT
AEFKMAXIMUM STARTING TORQUE9.00 INCH-OUNCES
AEFPNONTURN DEVICE RADIUS0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM
AGQLUNDERCUT LENGTH0.281 INCHES NOMINAL
AXGYMOUNTING METHODSTANDARD BUSHING
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION



Thank you for visiting Just Parts Unlimited!

Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top