123CM10003-1 Part by Howe Machine And Tool Corp with NSN 4030-00-060-3052 - Request a Quote Now

Part Number: 123CM10003-1

Manufacturer: howe machine and tool corp

NSN: 4030-00-060-3052

CAGE Code: 65777

NIIN: 000603052

Item Name : terminal rope swaging

INC Code: 41823

Country: USA

NCB Code: 00

FSG: 40 Rope Cable Chain and Fittings

FSC: 4030 Fittings for Rope Cable and Chain

For competitive procurement options on part number 123CM10003-1 from Howe Machine And Tool Corp (CAGE Code 65777), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 123CM10003-1 Details:

Part number 123CM10003-1 is manufactured by Howe Machine And Tool Corp and listed with the item name Terminal Rope Swaging. Classified under NSN 4030-00-060-3052, the NIIN of this item is 000603052, its INC is 41823, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 40 Rope Cable Chain and Fittings and Class (FSC) 4030 Fittings for Rope Cable and Chain. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 123CM10003-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 123CM10003-1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 4030-00-060-3052, 4030000603052

MRC	Criteria	Characteristic
AARX	Inside Diameter	0.223 INCHES MINIMUM AND 0.233 INCHES MAXIMUM
ADCS	Plain Shank Diameter	0.354 INCHES MINIMUM AND 0.359 INCHES MAXIMUM
TEST	Test Data Document	81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
AHHH	Length From Pinhole Center To End	4.437 INCHES NOMINAL
ABHC	Overall Width	1.624 INCHES NOMINAL
STYL	Style Designator	CLOSED
AHNK	Accommodated Material Diameter	0.188 INCHES NOMINAL
MRC	Decoded Requirement	Clear Text Reply
CTHX	Overall Height	0.375 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
AHNX	Bolt Hole Diameter	0.312 INCHES MINIMUM