H1615C Part by Hydranamics Inc with NSN 2590-00-471-0212 - Request a Quote Now

Part Number: H1615C

Manufacturer: hydranamics inc

NSN: 2590-00-471-0212

CAGE Code: 30014

NIIN: 004710212

Item Name : cylinder assembly actuating line

INC Code: 31310

Country: USA

NCB Code: 00

FSG: 25 Vehicular Equipment Components

FSC: 2590 Miscellaneous Vehicular Components

For competitive procurement options on part number H1615C from Hydranamics Inc (CAGE Code 30014), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number H1615C Details:

Part number H1615C is manufactured by Hydranamics Inc and listed with the item name Cylinder Assembly Actuating Line. Classified under NSN 2590-00-471-0212, the NIIN of this item is 004710212, its INC is 31310, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 25 Vehicular Equipment Components and Class (FSC) 2590 Miscellaneous Vehicular Components. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for H1615C

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part H1615C with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 2590-00-471-0212, 2590004710212

MRC	Criteria	Characteristic
ABMK	OVERALL WIDTH	7.750 INCHES NOMINAL
CLMW	PORT THREAD SERIES DESIGNATOR	UNEF ALL PORTS
CLNB	PORT THREAD CLASS	2B
AMDX	FIRST END HOLE DIAMETER	1.751 INCHES MINIMUM AND 1.755 INCHES MAXIMUM
CLMS	PORT LOCATION AND QUANTITY	1 CENTER SECTION 1 PISTON ROD END
AAHB	FIRST END OUTSIDE DIAMETER	3.500 INCHES NOMINAL
CLMY	PORT THREAD QUANTITY PER INCH	20 SINGLE PORT 18 ALL PORTS
ABJH	TEMP RATING	NOT RATED
CKSD	DESIGN CHARACTERISTICS	SINGLE ACTING SINGLE CYLINDER
CKSF	FIRST PISTON ROD END STYLE	BEARING TYPE
CLLN	(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY	NOT INCLUDED
CLMT	PORT STYLE	GASKET SEAL
AMPC	FIRST END THICKNESS AT MOUNTING HOLES	3.500 INCHES NOMINAL