D538-II-LU Part by Integra Technologies Corp with NSN 7035-01-425-7082 - Request a Quote Now

Part Number: D538-II-LU

Manufacturer: integra technologies corp

NSN: 7035-01-425-7082

CAGE Code: 72181

NIIN: 014257082

Item Name : eraser magnetic

Country: USA

NCB Code: 01

FSG: 70 Automatic Data Processing Equipment Including Firmware Software Supplies and Support Equipment

FSC: 7035 ADP Support Equipment

For competitive procurement options on part number D538-II-LU from Integra Technologies Corp (CAGE Code 72181), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number D538-II-LU Details:

Part number D538-II-LU is manufactured by Integra Technologies Corp and listed with the item name Eraser Magnetic. Classified under NSN 7035-01-425-7082, the NIIN of this item is 014257082, its INC is , and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 70 Automatic Data Processing Equipment Including Firmware Software Supplies and Support Equipment and Class (FSC) 7035 ADP Support Equipment. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for D538-II-LU

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part D538-II-LU with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 7035-01-425-7082, 7035014257082

MRC	Criteria	Characteristic
AGAV	End Item Identification	COMMAND AND DATA PROCESSING CENTER
FEAT	Special Features	MODEL D538-II MAGNETIC TAPE DSGAUSSER TYPE II; THE "-LU" IN THE P/N EQUALS "LORAL UNIT" WITH THE D530F4 UNIVERAL ADAPTER; MEDIA TYPE ACCOMMODATED: 3480/3490 IBM MAIN FRAME TYPE CARTRIDGES, TK50/70 CARTRIDGES, 1/4 IN. DATA CARTRIDGES, 3.50, 5.25 IN. AND 8.00 IN. FLOPPY DISKETTES, SMALL AND LARGE BERNOULLI CARTRIDGES, VHS CASSETTES, REEL TO REEL TAPE UP TO 16 IN. DIA AND ONE IN. WIDE; USES AN ELECTROMAGNET FIELD ERASING METHOD; SELF CONTAINED RUGGEDIZED UNIT; CAN BE USED AS EITHER A RACK MOUNTED OR TABLE TOP UNIT
ABHP	Overall Length	25.500 INCHES NOMINAL
ABKW	Overall Height	13.750 INCHES NOMINAL
ABMK	Overall Width	17.000 INCHES NOMINAL
MRC	Decoded Requirement	Clear Text Reply