AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number DPD2-N20-34P from Itt Corporation (CAGE Code 71468), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number DPD2-N20-34P Details:
Part number DPD2-N20-34P is manufactured by Itt Corporation and listed with the item name Connector Receptacle Electrical. Classified under NSN 5935-01-311-6322, the NIIN of this item is 013116322, its INC is 15093, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5935 Connectors Electrical. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5935-01-311-6322 Item PartTypeName: CONNECTOR,RECEPTACLE,ELECTRICAL | 5935 | 013116322 | 0 | P | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | G | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 127085-1 | 2 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 100.0 2ND MATING END 1ST CONTACT GROUPING |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 20.0 1ST MATING END 2ND CONTACT GROUPING |
| AFRN | POLARIZATION METHOD | MATING END |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY |
| CSGF | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE ALL MATING ENDS ALL CONTACT GROUPINGS |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-501 FED SPEC SINGLE MATERIAL RESPONSE |
| CTKL | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14 MIL SPEC SINGLE MATERIAL RESPONSE ALL MATING ENDS |
| CXCG | INCLUDED CONTACT QUANTITY | 4 2ND MATING END 1ST CONTACT GROUPING |
| AAQL | BODY STYLE | STRAIGHT SHAPE |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | 10 ALL MATING ENDS |
| CQTM | TERMINAL LOCATION | BACK ALL MATING ENDS ALL CONTACT GROUPINGS |
| FEAT | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO4131 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRMT | PRECIOUS MATERIAL | GOLD |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 20.0 2ND MATING END 2ND CONTACT GROUPING |
| AFRV | CONNECTOR LOCKING METHOD | FRICTION |
| CQYH | CONTACT SURFACE TREATMENT | GOLD ALL MATING ENDS ALL CONTACT GROUPINGS |
| CQZG | INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE ALL MATING ENDS |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS ALL CONTACT GROUPINGS |
| CSCF | TERMINAL TYPE | SOLDER WELL ALL MATING ENDS ALL CONTACT GROUPINGS |
| CXCL | INCLUDED CONTACT TYPE | ROUND PIN ALL MATING ENDS ALL CONTACT GROUPINGS |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | 0.052 GOLD GRAINS,TROY |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP |
| ABHP | OVERALL LENGTH | 1.624 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 3.742 INCHES MINIMUM AND 3.762 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 3.380 INCHES MINIMUM AND 3.400 INCHES MAXIMUM |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.156 INCHES MINIMUM AND 0.176 INCHES MAXIMUM |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.995 INCHES MINIMUM AND 1.015 INCHES MAXIMUM |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 2.870 INCHES MINIMUM AND 2.890 INCHES MAXIMUM |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.067 INCHES MINIMUM AND 0.087 INCHES MAXIMUM |
| AFQW | MATING END QUANTITY | 2 |
| AFQZ | CONTACT REMOVABILITY | NONREMOVABLE ALL MATING ENDS ALL CONTACT GROUPINGS |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 100.0 1ST MATING END 1ST CONTACT GROUPING |
| AFRT | SHELL TYPE | SOLID |
| CQTZ | CONTACT MATERIAL | COPPER ALLOY ALL MATING ENDS ALL CONTACT GROUPINGS |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY 380.0 |
| CSWM | SHELL SURFACE TREATMENT | CADMIUM |
| CXCG | INCLUDED CONTACT QUANTITY | 4 1ST MATING END 1ST CONTACT GROUPING |
| CXCG | INCLUDED CONTACT QUANTITY | 6 1ST MATING END 2ND CONTACT GROUPING |
| CXCG | INCLUDED CONTACT QUANTITY | 6 2ND MATING END 2ND CONTACT GROUPING |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
