LINK RC-40 Part by John Bean Technologies Corporation with NSN 3020-01-059-9180 - Request a Quote Now

Part Number: LINK RC-40

Manufacturer: john bean technologies corporation

NSN: 3020-01-059-9180

CAGE Code: 19383

NIIN: 010599180

Item Name : link roller chain

INC Code: 04488

Country: USA

NCB Code: 01

FSG: 30 Mechanical Power Transmission Equipment

FSC: 3020 Gears Pulleys Sprockets and Transmission Chain

For competitive procurement options on part number LINK RC-40 from John Bean Technologies Corporation (CAGE Code 19383), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number LINK RC-40 Details:

Part number LINK RC-40 is manufactured by John Bean Technologies Corporation and listed with the item name Link Roller Chain. Classified under NSN 3020-01-059-9180, the NIIN of this item is 010599180, its INC is 04488, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 30 Mechanical Power Transmission Equipment and Class (FSC) 3020 Gears Pulleys Sprockets and Transmission Chain. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for LINK RC-40

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part LINK RC-40 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 3020-01-059-9180, 3020010599180

MRC	Criteria	Characteristic
AJXT	LINK STYLE	ROLLER, COMBINATION, TAPERED AND RELIEVED EDGE
AWSM	LINK PLATE WIDTH	0.386 INCHES NOMINAL
AWSN	LINK PLATE WIDTH AT BUSHING END	0.452 INCHES NOMINAL
AWSP	LINK PLATE WIDTH AT PIN END	0.220 INCHES NOMINAL
AWSQ	LINK PLATE NOMINAL THICKNESS	0.0600 INCHES
AWWN	LINK ROLLER NOMINAL DIAMETER	0.3120 INCHES
AWWP	LINK NOMINAL WIDTH BETWEEN PLATES	0.3125 INCHES
CQBC	MINIMUM TENSILE STRENGTH	3700 POUNDS PER SQUARE INCH
MATT	III MATERIAL	STEEL