MX2257ARM32 Part by Joint Electronics Type Designation System with NSN 3040-00-704-1964 - Request a Quote Now

Part Number: MX2257ARM32

Manufacturer: joint electronics type designation system

NSN: 3040-00-704-1964

CAGE Code: 80058

NIIN: 007041964

Item Name : shaft assembly flex

INC Code: 20315

Country: USA

NCB Code: 00

FSG: 30 Mechanical Power Transmission Equipment

FSC: 3040 Miscellaneous Power Transmission Equipment

For competitive procurement options on part number MX2257ARM32 from Joint Electronics Type Designation System (CAGE Code 80058), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number MX2257ARM32 Details:

Part number MX2257ARM32 is manufactured by Joint Electronics Type Designation System and listed with the item name Shaft Assembly Flex. Classified under NSN 3040-00-704-1964, the NIIN of this item is 007041964, its INC is 20315, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 30 Mechanical Power Transmission Equipment and Class (FSC) 3040 Miscellaneous Power Transmission Equipment. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MX2257ARM32

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part MX2257ARM32 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number MX2257ARM32 with NSN 3040-00-704-1964, 3040007041964

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3040-00-704-1964 Item PartTypeName: SHAFT ASSEMBLY,FLEXIBLE	3040	007041964	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
711578	6	9	3

Characteristics Data of NSN 3040-00-704-1964, 3040007041964

MRC	Criteria	Characteristic
AAUJ	SPLINE MAJOR DIAMETER	0.299 INCHES NOMINAL BOTH ENDS
ABHP	OVERALL LENGTH	49.000 INCHES NOMINAL
ABSA	SPLINE QUANTITY	12 BOTH ENDS
ABSC	SPLINE MINOR DIAMETER	0.243 INCHES NOMINAL BOTH ENDS
ADMS	WRENCHING FACILITY OUTSIDE DIAMETER	0.750 INCHES NOMINAL SECOND END
AEDN	TIP LENGTH	1.000 INCHES NOMINAL BOTH ENDS
AGPX	SHOULDER OUTSIDE DIAMETER	0.5625 INCHES NOMINAL FIRST END
AKMH	CORE DIAMETER	0.150 INCHES NOMINAL
AXFG	SPLINE PRESSURE ANGLE IN DEG	14.0 BOTH ENDS
AXYS	SPLINE TYPE	INVOLUTE BOTH ENDS
CFQW	CROSS SECTION SIZE AND LOCATION	0.40625 INCHES NOMINAL DIAMETER BOTH ENDS
CFRM	TORSIONAL DEFLECTION RATING	18.0 IN.-LB WINDING AND 17.0 IN.-LB UNWWINDING TORSIONAL DEFLECTION
CFRW	END OVERALL DIAMETER	0.750 INCHES NOMINAL FIRST END
CFRW	END OVERALL DIAMETER	0.750 INCHES NOMINAL SECOND END
CFRY	LUBRICATION FITTING	NOT PROVIDED FIRST END
CFSB	CORE ROTATION DIRECTION	CLOCKWISE OR COUNTERCLOCKWISE
CFSL	CORE REMOVABILITY	NONREMOVABLE
CGDN	MINIMUM OPERATING RADIUS	3.500 INCHES
AAJD	THREAD CLASS	2A FIRST END
AAJF	THREAD DIRECTION	RIGHT-HAND FIRST END
AASA	THREAD LENGTH	0.375 INCHES NOMINAL FIRST END
AECT	THREAD DEPTH	0.375 INCHES NOMINAL FIRST END
AGAV	END ITEM IDENTIFICATION	TEST SET,RADIO,JEDTS,TYPE N0. AN/ARM-32
AJXJ	CORE MATERIAL	STEEL
AJYP	SCREW THREAD SERIES DESIGNATOR	UNS FIRST END
APJC	THREAD LOCATION	INTERNAL FIRST END
APTD	END TYPE	ROUND,EXTERNAL SPLINED BOTH ENDS
AWZY	END CONNECTION TYPE	THREADED INTERNAL FIRST END
AXFH	SPLINE LENGTH	0.4375 INCHES NOMINAL BOTH ENDS
BDRL	SETSCREW	NOT INCLUDED BOTH ENDS
BJPS	CASING MATERIAL	STEEL
BPPL	WRENCHING FACILITY TYPE	KNURLED SURFACE SECOND END
CFRN	CASING SURFACE TREATMENT	GALVANIZED
CFRP	CASING LENGTH BETWEEN FERRULES	48.000 INCHES NOMINAL
CFRQ	CASING OUTSIDE DIAMETER	0.295 INCHES NOMINAL
CFRR	CASING PROTECTIVE DEVICE TYPE	PLASTIC COVER
CFRT	SWIVEL END	NOT PROVIDED FIRST END
CFRT	SWIVEL END	PROVIDED SECOND END
CFRY	LUBRICATION FITTING	NOT PROVIDED SECOND END
CFRZ	CORE OVERALL LENGTH	48.000 INCHES NOMINAL
ZZZV	FSC APPLICATION DATA	TEST SET,ELECT. EQUIP.