AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number UG90U from Joint Electronics Type Designation System (CAGE Code 80058), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number UG90U Details:
Part number UG90U is manufactured by Joint Electronics Type Designation System and listed with the item name Connector Receptacle Electrical. Classified under NSN 5935-00-666-1287, the NIIN of this item is 006661287, its INC is , and its NCB code is 00 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5935 Connectors Electrical. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| MRC | Criteria | Characteristic |
|---|---|---|
| PRMT | Precious Material | SILVER |
| AFQJ | Cable Entrance Diameter | 0.212 INCHES NOMINAL |
| AFRN | Polarization Method | MATING END |
| AAQL | Body Style | STRAIGHT SHAPE W/CABLE CLAMP |
| SR-5 | Design Control Reference Or Manufacturers Code | |
| CQYH | Contact Surface Treatment | SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
| CSPT | Shell Material | COPPER ALLOY |
| AFRT | Shell Type | SOLID |
| AEHA | Distance Between Centerlines Of Mounting Facilities Parallel To Body Width | 0.531 INCHES NOMINAL |
| CQZG | Insert Material | PLASTIC SINGLE MATING END |
| CTHH | Shell Material Document And Classification | QQ-B-626,COMP 22 FED SPEC SINGLE MATERIAL RESPONSE |
| AFQK | Distance From Mounting Shoulder To Front Face | 0.562 INCHES NOMINAL |
| MRC | Decoded Requirement | Clear Text Reply |
| ABKW | Overall Height | 0.750 INCHES NOMINAL |
| AFQX | Contact Position Arrangement Style | BNC SINGLE MATING END |
| AFQZ | Contact Removability | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| SR-5 | Design Control Reference Or Manufacturers Code | 80058 |
| CQTM | Terminal Location | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CSWM | Shell Surface Treatment | SILVER |
| SR-5 | Design Control Reference Or Manufacturers Code | UG90U |
| CXCG | Included Contact Quantity | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQW | Mating End Quantity | 1 |
| AFRD | Contact Maximum Ac Voltage Rating In Volts | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| ADZC | Environmental Protection | MOISTURE RESISTANT |
| AFRW | Connector Cable Strain Relief Method | CABLE CLAMP |
| CQTZ | Contact Material | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| ABMK | Overall Width | 0.750 INCHES NOMINAL |
| CXCL | Included Contact Type | ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| ABHP | Overall Length | 1.125 INCHES NOMINAL |
| CSCF | Terminal Type | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| CTKL | Insert Material Document And Classification | MIL-P-19168 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| ABKH | Bushing Diameter | 0.437 INCHES NOMINAL |
| AFRV | Connector Locking Method | BAYONET PIN |
| AFRY | Radio Frequency Type Contact Characteristic Impedance In Ohms | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CSGF | Contact Material Document And Classification | QQ-C-530,COMP HT FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| AEBW | Center To Center Distance Between Mounting Facilities Parallel To Height | 0.531 INCHES NOMINAL |
| AEBV | Unthreaded Mounting Hole Diameter | 0.125 INCHES NOMINAL |
| PMLC | Precious Material And Location | CONTACT AND SHELL SURFACES SILVER |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
