UG22GU Part by Joint Electronics Type Designation System with NSN 5935-00-928-3126 - Request a Quote Now

Part Number:  UG22GU
CAGE Code:  80058
NIIN:  009283126
INC Code:  15093
Country:  USA
NCB Code:  00

For competitive procurement options on part number UG22GU from Joint Electronics Type Designation System (CAGE Code 80058), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number UG22GU Details:

Part number UG22GU is manufactured by Joint Electronics Type Designation System and listed with the item name Connector Receptacle Electrical. Classified under NSN 5935-00-928-3126, the NIIN of this item is 009283126, its INC is 15093, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5935 Connectors Electrical. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for UG22GU

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Get Started on Procurement

  1. Complete an RFQ Form: Fill out this form for part UG22GU with details on your operational requirements, including your target quantity and expected turnaround time.
  2. Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
  3. Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number UG22GU with NSN 5935-00-928-3126, 5935009283126

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-00-928-3126

Item PartTypeName:

CONNECTOR,RECEPTACLE,ELECTRICAL

5935009283126P
CIICHCCESDPMICCriticalityENAC
G0
Part NumberISCRNVCRNCCHCCMSDSSADC
042-20063-016B95

Characteristics Data of NSN 5935-00-928-3126, 5935009283126

MRCCriteriaCharacteristic
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-C-39012 GOVERNMENT SPECIFICATION
AAJDTHREAD CLASS2A
AAJFTHREAD DIRECTIONRIGHT-HAND
AAQLBODY STYLESTRAIGHT SHAPE W/CABLE CLAMP
ABHPOVERALL LENGTH1.672 INCHES NOMINAL
ABKHBUSHING DIAMETER0.781 INCHES NOMINAL
ABKWOVERALL HEIGHT0.984 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
ABMKOVERALL WIDTH0.984 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
ADZCENVIRONMENTAL PROTECTIONMOISTURE RESISTANT
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.125 INCHES MAXIMUM
AEBWCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT0.708 INCHES MINIMUM AND 0.728 INCHES MAXIMUM
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.708 INCHES MINIMUM AND 0.728 INCHES MAXIMUM
AFQJCABLE ENTRANCE DIAMETER0.425 INCHES MAXIMUM
AFQRTHREADED DEVICE TYPECOUPLING FACILITY
AFQWMATING END QUANTITY1
AFQXCONTACT POSITION ARRANGEMENT STYLEN SINGLE MATING END
AFQZCONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRDCONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS1000.0 SINGLE MATING END SINGLE CONTACT GROUPING
AFRFCONTACT MAXIMUM FREQUENCY RATING11000.0 MEGAHERTZ SINGLE MATING END SINGLE CONTACT GROUPING
AFRTSHELL TYPESOLID
AFRVCONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
AFRWCONNECTOR CABLE STRAIN RELIEF METHODCOMPRESSION NUT
AFRYRADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 SINGLE MATING END SINGLE CONTACT GROUPING
CMLPTHREAD QUANTITY PER INCH24
CQJXNOMINAL THREAD SIZE0.625 INCHES
CQTMTERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD SINGLE MATING END SINGLE CONTACT GROUPING
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CSCFTERMINAL TYPECRIMP SINGLE MATING END SINGLE CONTACT GROUPING
CSPTSHELL MATERIALCOPPER ALLOY
CXCGINCLUDED CONTACT QUANTITY1 SINGLE MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPECOAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PMWTPRECIOUS MATERIAL AND WEIGHT0.005 GOLD GRAINS,TROY
PRMTPRECIOUS MATERIALGOLD
TESTTEST DATA DOCUMENT82349-MIL-C-39012 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
THSDTHREAD SERIES DESIGNATORUNEF



Thank you for visiting Just Parts Unlimited!

Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top