866010 Part by Lds Test And Measurement Gmbh with NSN 3010-00-908-6933 - Request a Quote Now

Part Number: 866010

Manufacturer: lds test and measurement gmbh

NSN: 3010-00-908-6933

CAGE Code: 3SLK7

NIIN: 009086933

Item Name : gearcase motor

INC Code: 01102

Country: USA

NCB Code: 00

FSG: 30 Mechanical Power Transmission Equipment

FSC: 3010 Torque Converters and Speed Changers

For competitive procurement options on part number 866010 from Lds Test And Measurement Gmbh (CAGE Code 3SLK7), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 866010 Details:

Part number 866010 is manufactured by Lds Test And Measurement Gmbh and listed with the item name Gearcase Motor. Classified under NSN 3010-00-908-6933, the NIIN of this item is 009086933, its INC is 01102, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 30 Mechanical Power Transmission Equipment and Class (FSC) 3010 Torque Converters and Speed Changers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 866010

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 866010 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 866010 with NSN 3010-00-908-6933, 3010009086933

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3010-00-908-6933 Item PartTypeName: GEARCASE-MOTOR	3010	009086933	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
343999	2	9	5

Characteristics Data of NSN 3010-00-908-6933, 3010009086933

MRC	Criteria	Characteristic
AAJT	OVERALL HEIGHT	4.750 INCHES
AAJU	OVERALL LENGTH	2.840 INCHES
AAJV	OVERALL WIDTH	2.180 INCHES
AAUB	HOLE DIAMETER	0.0940 INCHES NOMINAL SINGLE END
AAZQ	HOLE DEPTH	0.1870 INCHES NOMINAL SINGLE END
ABGH	STEP DIAMETER	0.187 INCHES NOMINAL SINGLE END
ABGJ	STEP LENGTH	1.000 INCHES NOMINAL SINGLE END
ABWV	SHAFT DIAMETER	0.2500 INCHES NOMINAL SINGLE END
ACDC	CURRENT TYPE	AC INPUT
AJWZ	HOLE CENTER TO SHAFT END DISTANCE	0.1560 INCHES NOMINAL SINGLE END
AKCT	SHAFT ROTATION DIRECTION	COUNTERCLOCKWISE SINGLE END
AKPS	DUTY CYCLE	CONTINUOUS
ANPZ	ENCLOSURE FEATURE	OPEN
AXCP	WINDING TYPE	INDUCTION-SPLIT PHASE
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	6 THREADED HOLE
BFLY	GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION	OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END
BFMF	COOLING METHOD	AMBIENT AIR
BKPB	CURRENT RATING METHOD	LOAD
BKPP	SPEED CONTROL METHOD AND DEVICE TYPE	AUTOMATIC MECHANICAL
BKPQ	INCLOSURE SPECIFICATION	COMMERCIAL
CBBL	FEATURES PROVIDED	VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION
CWCS	LENGTH OF SHAFT FROM HOUSING	1.450 INCHES SINGLE END
CWDM	SHAFT CENTER TO MOUNTING SURFACE DISTANCE	3.660 INCHES SINGLE END
CWDT	NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	1.680 INCHES
CWDY	TEMP RATING	70.0 AMBIENT DEG CELSIUS
CWFY	NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH	1.840 INCHES
CWGL	CURRENT RATING IN AMPS	0.480 SINGLE OUTPUT
CWGQ	CONNECTION TYPE AND VOLTAGE RATING IN VOLTS	115.0 LINE TO NEUTRAL SINGLE INPUT
CWHK	GEARED HEAD OUTPUT SHAFT SPEED RATING	25.900 SINGLE REVOLUTIONS PER MINUTE SINGLE END
CWHZ	SHAFT END CHARACTERISTIC	A12 FIRST STYLE AND A13 SECOND STYLE SINGLE END
FAAZ	PHASE	SINGLE INPUT
FREQ	FREQUENCY IN HERTZ	60.0 INPUT
TTQY	TERMINAL TYPE AND QUANTITY	2 SOLDER LUG