HT-A1N Part by Leach International Corporation with NSN 5945-01-524-2084 - Request a Quote Now

Part Number:  HT-A1N
CAGE Code:  58657
NIIN:  015242084
Item Name :  relay electromagnet
INC Code:  32512
Country:  USA
NCB Code:  01

For competitive procurement options on part number HT-A1N from Leach International Corporation (CAGE Code 58657), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number HT-A1N Details:

Part number HT-A1N is manufactured by Leach International Corporation and listed with the item name Relay Electromagnet. Classified under NSN 5945-01-524-2084, the NIIN of this item is 015242084, its INC is 32512, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5945 Relays and Solenoids. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for HT-A1N

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Get Started on Procurement

  1. Complete an RFQ Form: Fill out this form for part HT-A1N with details on your operational requirements, including your target quantity and expected turnaround time.
  2. Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
  3. Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number HT-A1N with NSN 5945-01-524-2084, 5945015242084

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5945-01-524-2084

Item PartTypeName:

RELAY,ELECTROMAGNETIC

59450152420840NA
CIICHCCESDPMICCriticalityENAC
UAA0
Part NumberISCRNVCRNCCHCCMSDSSADC
124200525

Characteristics Data of NSN 5945-01-524-2084, 5945015242084

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH3.130 INCHES MAXIMUM"
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH2.000 INCHES NOMINAL SINGLE MOUNTING FACILITY"
ABKRCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH2.000 INCHES NOMINAL SINGLE MOUNTING FACILITY"
ADAVOVERALL DIAMETER2.500 INCHES MAXIMUM"
ADZCENVIRONMENTAL PROTECTIONHERMETIC"
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.168 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 0.175 INCHES MAXIMUM SINGLE MOUNTING FACILITY"
AGAVEND ITEM IDENTIFICATIONALOFTS SONAR SYSTEM, MODEL 980 (V1)"
AKDXWINDING QUANTITY1"
APCNCOIL QUANTITY1"
APNAWINDING DC RESISTANCE RATING180.0 OHMS MINIMUM SINGLE WINDING AND 220.0 OHMS MAXIMUM SINGLE WINDING"
APNPDUTY TYPECONTINUOUS"
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE SINGLE MOUNTING FACILITY"
AYSCPILE-UP MAIN CONTACT FORM ARRANGEMENT3C"
CQYJMOUNTING FACILITY PATTERNRECTANGULAR SINGLE MOUNTING FACILITY"
CSXFOPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP28.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING"
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE20.0 AMPERES DC INDUCTIVE LOAD"
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE20.0 AMPERES DC MOTOR LOAD"
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE50.0 AMPERES DC RESISTIVE LOAD"
CWABMAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS29.0 DC"
CXCYPART NAME ASSIGNED BY CONTROLLING AGENCYCONTACTOR 60 AMP"
TTQYTERMINAL TYPE AND QUANTITY13 THREADED STUD ENERGIZING ELEMENT AND CONTACTS"
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-PRF-6106 GOVERNMENT SPECIFICATION"
ABHPOVERALL LENGTH3.130 INCHES MAXIMUM"
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH2.000 INCHES NOMINAL SINGLE MOUNTING FACILITY"
ABKRCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH2.000 INCHES NOMINAL SINGLE MOUNTING FACILITY"
ADAVOVERALL DIAMETER2.500 INCHES MAXIMUM"
ADZCENVIRONMENTAL PROTECTIONHERMETIC"
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.168 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 0.175 INCHES MAXIMUM SINGLE MOUNTING FACILITY"
AGAVEND ITEM IDENTIFICATIONALOFTS SONAR SYSTEM, MODEL 980 (V1)"
AKDXWINDING QUANTITY1"
APCNCOIL QUANTITY1"
APNAWINDING DC RESISTANCE RATING180.0 OHMS MINIMUM SINGLE WINDING AND 220.0 OHMS MAXIMUM SINGLE WINDING"
APNPDUTY TYPECONTINUOUS"
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE SINGLE MOUNTING FACILITY"
AYSCPILE-UP MAIN CONTACT FORM ARRANGEMENT3C"
CQYJMOUNTING FACILITY PATTERNRECTANGULAR SINGLE MOUNTING FACILITY"
CSXFOPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP28.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING"
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE20.0 AMPERES DC INDUCTIVE LOAD"
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE20.0 AMPERES DC MOTOR LOAD"
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE50.0 AMPERES DC RESISTIVE LOAD"
CWABMAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS29.0 DC"
CXCYPART NAME ASSIGNED BY CONTROLLING AGENCYCONTACTOR 60 AMP"
TTQYTERMINAL TYPE AND QUANTITY13 THREADED STUD ENERGIZING ELEMENT AND CONTACTS"
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-PRF-6106 GOVERNMENT SPECIFICATION"



Thank you for visiting Just Parts Unlimited!

Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top