6R001-01DP09 Part by Lockheed Electronics Co Inc with NSN 5905-00-006-5480 - Request a Quote Now

Part Number: 6R001-01DP09

Manufacturer: lockheed electronics co inc

NSN: 5905-00-006-5480

CAGE Code: 19723

NIIN: 000065480

Item Name : resistor variable wire wound non

INC Code: 37406

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

FSC: 5905 Resistors

For competitive procurement options on part number 6R001-01DP09 from Lockheed Electronics Co Inc (CAGE Code 19723), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 6R001-01DP09 Details:

Part number 6R001-01DP09 is manufactured by Lockheed Electronics Co Inc and listed with the item name Resistor Variable Wire Wound Non. Classified under NSN 5905-00-006-5480, the NIIN of this item is 000065480, its INC is 37406, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5905 Resistors. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 6R001-01DP09

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 6R001-01DP09 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 6R001-01DP09 with NSN 5905-00-006-5480, 5905000065480

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-00-006-5480 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON	5905	000065480		N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
			A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10120170	B	9	6

Characteristics Data of NSN 5905-00-006-5480, 5905000065480

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1
AAQL	BODY STYLE	RECTANGULAR W/MOUNTING HOLES
AARG	RELIABILITY INDICATOR	ESTABLISHED
AARH	RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.100
ABHP	OVERALL LENGTH	0.555 INCHES MAXIMUM
ABJT	TERMINAL LENGTH	0.172 INCHES MINIMUM
ABKW	OVERALL HEIGHT	0.500 INCHES NOMINAL
ABMK	OVERALL WIDTH	0.372 INCHES MINIMUM
ABTB	MOUNTING HOLE DIAMETER	0.073 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.078 INCHES NOMINAL
ABXF	SHAFT LENGTH	0.045 INCHES NOMINAL
ADAQ	BODY LENGTH	0.500 INCHES NOMINAL
ADAT	BODY WIDTH	0.235 INCHES NOMINAL
ADAU	BODY HEIGHT	0.500 INCHES NOMINAL
AEDX	SHAFT STYLE	ROUND,SLOTTED
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.200 INCHES NOMINAL
AGTP	LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.520 INCHES NOMINAL
AKPV	MOUNTING FACILITY QUANTITY	2
APXH	TERMINAL LOCATION	LEFT ADJACENT SIDE TWO ROWS
AXGY	MOUNTING METHOD	TERMINAL
AYQR	CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS	0.100 INCHES NOMINAL
CQCC	ELECTRICAL RESISTANCE PER SECTION	5.000 KILOHMS SINGLE SECTION
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.100 INCHES NOMINAL
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.75 FREE AIR SINGLE SECTION
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION
TEST	TEST DATA DOCUMENT	81349-MILR39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTING
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN