AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number KH19-01 from Mameco Intl Inc (CAGE Code 94836), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number KH19-01 Details:
Part number KH19-01 is manufactured by Mameco Intl Inc and listed with the item name Connector Receptacle Electrical. Classified under NSN 5935-00-849-1688, the NIIN of this item is 008491688, its INC is 15093, and its NCB code is 00 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5935 Connectors Electrical. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5935-00-849-1688 Item PartTypeName: CONNECTOR,RECEPTACLE,ELECTRICAL | 5935 | 008491688 | 0 | P | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | S | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 010-001912 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABMK | OVERALL WIDTH | 1.187 INCHES NOMINAL |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.125 INCHES NOMINAL |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.906 INCHES NOMINAL |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.906 INCHES NOMINAL |
| AFQJ | CABLE ENTRANCE DIAMETER | 0.206 INCHES NOMINAL |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 1000.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRV | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQTM | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CQYH | CONTACT SURFACE TREATMENT | SILVER AND RHODIUM SINGLE MATING END SINGLE CONTACT GROUPING |
| CQZG | INSERT MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365,TYPE III,FED SPEC 1ST TREATMENT RESPONSE AND MIL-F-14072 MIL SPEC 2ND TREATMENT RESPONSE |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,COMP 22,1/2 HT FED SPEC SINGLE MATERIAL RESPONSE |
| CXCG | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| PRMT | PRECIOUS MATERIAL | SILVER AND RHODIUM |
| AAJD | THREAD CLASS | 2A |
| AAQL | BODY STYLE | STRAIGHT SHAPE W/CABLE CLAMP |
| ABHP | OVERALL LENGTH | 1.438 INCHES NOMINAL |
| ABKH | BUSHING DIAMETER | 0.750 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 1.187 INCHES NOMINAL |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND VIBRATION RESISTANT AND SHOCK RESISTANT AND CORROSION RESISTANT |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.792 INCHES NOMINAL |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | HN SINGLE MATING END |
| AFQZ | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRT | SHELL TYPE | SOLID |
| AFRW | CONNECTOR CABLE STRAIN RELIEF METHOD | COMPRESSION NUT |
| AFRY | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES |
| CQTZ | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC 1ST TREATMENT RESPONSE AND MIL-F-14072,COND HT MIL SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| CSGF | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-C-533,COND H FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CSPT | SHELL MATERIAL | COPPER ALLOY |
| CSWM | SHELL SURFACE TREATMENT | SILVER AND RHODIUM |
| CXCL | INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| PMLC | PRECIOUS MATERIAL AND LOCATION | CONTACT AND SHELL SURFACES SILVER AND CONTACT AND SHELL SURFACES RHODIUM |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | 0.105 SILVER GRAINS,TROY AND 0.005 RHODIUM GRAINS,TROY |
| THSD | THREAD SERIES DESIGNATOR | UNEF |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
