35BS18-1 2 Part by Martin Sprocket And Gear Inc with NSN 3020-01-112-9489 - Request a Quote Now

Part Number: 35BS18-1 2

Manufacturer: martin sprocket and gear inc

NSN: 3020-01-112-9489

CAGE Code: 05506

NIIN: 011129489

Item Name : sprocket wheel

INC Code: 04456

Country: USA

NCB Code: 01

FSG: 30 Mechanical Power Transmission Equipment

FSC: 3020 Gears Pulleys Sprockets and Transmission Chain

For competitive procurement options on part number 35BS18-1 2 from Martin Sprocket And Gear Inc (CAGE Code 05506), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 35BS18-1 2 Details:

Part number 35BS18-1 2 is manufactured by Martin Sprocket And Gear Inc and listed with the item name Sprocket Wheel. Classified under NSN 3020-01-112-9489, the NIIN of this item is 011129489, its INC is 04456, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 30 Mechanical Power Transmission Equipment and Class (FSC) 3020 Gears Pulleys Sprockets and Transmission Chain. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 35BS18-1 2

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 35BS18-1 2 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 3020-01-112-9489, 3020011129489

MRC	Criteria	Characteristic
ABHE	OUTSIDE DIAMETER	2.350 INCHES NOMINAL
ABHP	OVERALL LENGTH	0.750 INCHES NOMINAL
ABXV	BORE DIAMETER	0.500 INCHES NOMINAL
ADGE	BORE LENGTH	0.750 INCHES NOMINAL
AGJS	PITCH DIAMETER	2.159 INCHES NOMINAL
AKYN	FURNISHED ITEMS AND QUANTITY	SETSCREWS,2 EACH
AQPL	FACE WIDTH	0.168 INCHES NOMINAL
ARJD	DESIGN FORM	PLAIN
ASBP	BORE TYPE	STRAIGHT
AXND	COUNTERBORE FEATURE	NOT INCLUDED
BSGG	KEYING FACILITY	NOT INCLUDED
BSNP	SECURING METHOD	SETSCREW
BXSJ	LIGHTENING HOLE	NOT INCLUDED
BYDZ	PROTRUDING HUB CHARACTERISTIC	PLAIN
BYFF	SECURING LOCATION	AA END
BYFH	BELT/CHAIN/FILM SIZE FOR WHICH DESIGNED	ROLLER CHAIN
BYFJ	ROLLER CHAIN PITCH TYPE FOR WHICH DESIGNED	SINGLE PITCH
BYFL	TEETH ROW QUANTITY	1
BYFN	TEETH QUANTITY PER ROW	18
BYFP	ASA STANDARD CHAIN NUMBER	35
BYFQ	HARDNESS RATING TEST METHOD	NOT RATED
BYFS	BORE BEARING	NOT INCLUDED
BYFW	HUB EXTERNAL KEYWAY	NOT INCLUDED
BYGF	TOOTH PITCH	0.375 INCHES NOMINAL
BYZD	HUB END OUTSIDE DIAMETER AND LOCATION	1.750 INCHES NOMINAL AA END
BYZF	DISTANCE FROM OUTSIDE FLANGE/RIM TO HUB END AND LOCATION	0.582 INCHES NOMINAL AA END
MATT	MATERIAL	STEEL
STYL	III STYLE DESIGNATOR	PLAIN