AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number SG7915AT 883B from Microsemi Corporation (CAGE Code 34333), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number SG7915AT 883B Details:
Part number SG7915AT 883B is manufactured by Microsemi Corporation and listed with the item name Microcircuit Linear. Classified under NSN 5962-01-407-3190, the NIIN of this item is 014073190, its INC is 31778, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5962 Microcircuits Electronic. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5962-01-407-3190 Item PartTypeName: MICROCIRCUIT,LINEAR | 5962 | 014073190 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | B | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| M235A695-1 | 5 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAR | BODY OUTSIDE DIAMETER | 0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM" |
| ADAU | BODY HEIGHT | 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM" |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 2.0 WATTS" |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS" |
| AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS" |
| AGAV | END ITEM IDENTIFICATION | B-1B" |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC SENSITIVE AND BURN IN, MIL-STD-883, CLASS B AND MONOLITHIC AND NEGATIVE OUTPUTS AND TESTED TO MIL-STD-883" |
| CQSJ | INCLOSURE MATERIAL | METAL" |
| CQSZ | INCLOSURE CONFIGURATION | CAN" |
| CQZP | INPUT CIRCUIT PATTERN | 1 INPUT" |
| CRTL | CRITICALITY CODE JUSTIFICATION | CBBL" |
| CSSL | DESIGN FUNCTION AND QUANTITY | 1 REGULATOR, VOLTAGE, DC" |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | TO-39 JOINT ELECTRON DEVICE ENGINEERING COUNCIL" |
| CTQX | CURRENT RATING PER CHARACTERISTIC | 0.50 MILLIAMPERES COLLECTOR CUTOFF CURRENT, DC, BASE OPEN NOT APPLICABLE AND 1.70 MILLIAMPERES AVERAGE FORWARD CURRENT AVERAGED OVER A FULL 60-HZ CYCLE NOT APPLICABLE AND 6.00 MILLIAMPERES REVERSE CURRENT, DC BLANK" |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | MICROCIRCUIT, NEGATIVE VOLTAGE REGULATOR;1.0 A NEGATIVE REGULATOR, FIXED 15 VOLT" |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | -14.55 VOLTS MINIMUM NEGATIVE OUTPUT AND -15.45 VOLTS MAXIMUM NEGATIVE OUTPUT AND -17.50 VOLTS MINIMUM INPUT" |
| FEAT | SPECIAL FEATURES | THIS ITEM IS A STANDARDIZED MICROCIRCUIT DRAWING (S M D) NUMBER : 67268 5962-8874801XA" |
| TEST | TEST DATA DOCUMENT | 96906-MIL-STD-883 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.)." |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN" |
| ADAR | BODY OUTSIDE DIAMETER | 0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM" |
| ADAU | BODY HEIGHT | 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM" |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 2.0 WATTS" |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS" |
| AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS" |
| AGAV | END ITEM IDENTIFICATION | B-1B" |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC SENSITIVE AND BURN IN, MIL-STD-883, CLASS B AND MONOLITHIC AND NEGATIVE OUTPUTS AND TESTED TO MIL-STD-883" |
| CQSJ | INCLOSURE MATERIAL | METAL" |
| CQSZ | INCLOSURE CONFIGURATION | CAN" |
| CQZP | INPUT CIRCUIT PATTERN | 1 INPUT" |
| CRTL | CRITICALITY CODE JUSTIFICATION | CBBL" |
| CSSL | DESIGN FUNCTION AND QUANTITY | 1 REGULATOR, VOLTAGE, DC" |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | TO-39 JOINT ELECTRON DEVICE ENGINEERING COUNCIL" |
| CTQX | CURRENT RATING PER CHARACTERISTIC | 0.50 MILLIAMPERES COLLECTOR CUTOFF CURRENT, DC, BASE OPEN NOT APPLICABLE AND 1.70 MILLIAMPERES AVERAGE FORWARD CURRENT AVERAGED OVER A FULL 60-HZ CYCLE NOT APPLICABLE AND 6.00 MILLIAMPERES REVERSE CURRENT, DC BLANK" |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | MICROCIRCUIT, NEGATIVE VOLTAGE REGULATOR;1.0 A NEGATIVE REGULATOR, FIXED 15 VOLT" |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | -14.55 VOLTS MINIMUM NEGATIVE OUTPUT AND -15.45 VOLTS MAXIMUM NEGATIVE OUTPUT AND -17.50 VOLTS MINIMUM INPUT" |
| FEAT | SPECIAL FEATURES | THIS ITEM IS A STANDARDIZED MICROCIRCUIT DRAWING (S M D) NUMBER : 67268 5962-8874801XA" |
| TEST | TEST DATA DOCUMENT | 96906-MIL-STD-883 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.)." |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN" |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
