J037-240J Part by Minisystems Inc with NSN 5905-01-091-9487 - Request a Quote Now

Part Number:  J037-240J
Manufacturer:  minisystems inc
CAGE Code:  50316
NIIN:  010919487
Item Name :  resistor fixed film
INC Code:  05311
Country:  USA
NCB Code:  01

For competitive procurement options on part number J037-240J from Minisystems Inc (CAGE Code 50316), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number J037-240J Details:

Part number J037-240J is manufactured by Minisystems Inc and listed with the item name Resistor Fixed Film. Classified under NSN 5905-01-091-9487, the NIIN of this item is 010919487, its INC is 05311, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5905 Resistors. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for J037-240J

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Get Started on Procurement

  1. Complete an RFQ Form: Fill out this form for part J037-240J with details on your operational requirements, including your target quantity and expected turnaround time.
  2. Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
  3. Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number J037-240J with NSN 5905-01-091-9487, 5905010919487

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-091-9487

Item PartTypeName:

RESISTOR,FIXED,FILM

5905010919487NA
CIICHCCESDPMICCriticalityENAC
AV
Part NumberISCRNVCRNCCHCCMSDSSADC
1C240J195

Characteristics Data of NSN 5905-01-091-9487, 5905010919487

MRCCriteriaCharacteristic
AAPETEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS-200.0 TO 200.0
AAPPELECTRICAL RESISTANCE24.000 OHMS
AAPQRESISTANCE TOLERANCE IN PERCENT-5.000 TO 5.000
AAQGAMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER125.0
AAQHTEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS-65.0 TO 125.0
AARGRELIABILITY INDICATORNOT ESTABLISHED
ADAQBODY LENGTH0.050 INCHES NOMINAL
ADATBODY WIDTH0.050 INCHES NOMINAL
ADAUBODY HEIGHT0.014 INCHES NOMINAL
AEFBPOWER DISSIPATION RATING IN WATTS0.050 FREE AIR
AEHYAMBIENT TEMP AT FULL RATED POWER70.0 DEG CELSIUS
AKNAINCLOSURE TYPEENCAPSULATED
CSCFTERMINAL TYPETERMINAL TYPE PER BODY STYLE
PMLCPRECIOUS MATERIAL AND LOCATIONTERMINAL SURFACES PALLADIUM AND TERMINAL SURFACES SILVER OR TERMINAL SURFACES PLATINUM AND TERMINAL SURFACES GOLD
STYLSTYLE DESIGNATORTERMINATION PAD EACH END
TESTTEST DATA DOCUMENT97942-583R098 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW



Thank you for visiting Just Parts Unlimited!

Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top