FP-11 Part by Minnesota Mining And Mfg Co with NSN 1560-01-375-6809 - Request a Quote Now

Part Number: FP-11

Manufacturer: minnesota mining and mfg co

NSN: 1560-01-375-6809

CAGE Code: 1E497

NIIN: 013756809

Item Name : cover radome

INC Code: 16216

Country: USA

NCB Code: 01

FSG: 15 Aircraft and Airframe Structural Components

FSC: 1560 Airframe Structural Components

For competitive procurement options on part number FP-11 from Minnesota Mining And Mfg Co (CAGE Code 1E497), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number FP-11 Details:

Part number FP-11 is manufactured by Minnesota Mining And Mfg Co and listed with the item name Cover Radome. Classified under NSN 1560-01-375-6809, the NIIN of this item is 013756809, its INC is 16216, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 15 Aircraft and Airframe Structural Components and Class (FSC) 1560 Airframe Structural Components. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for FP-11

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part FP-11 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number FP-11 with NSN 1560-01-375-6809, 1560013756809

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
1560-01-375-6809 Item Description: Cover Radome	1560	013756809	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
Fp-11	6	2	3

Characteristics Data of NSN 1560-01-375-6809, 1560013756809

MRC	Criteria	Characteristic
FEAT	Special Features	ITEM IS 15 IN. DIA AT BASE,8 IN TALL: 0.016 IN THICK AT CENTER DECREASING TO 0.009 IN AT BASE; TENSIBLE STRENGTH 117 IN/LBS; TEAR STRENGTH 5.8 LBS; HARDNESS RATING SHORE A 80 BY ASTM-D 1938; SOLVENT RESISTANCE AFTER 24 HRS IMMERSION MOTOR OIL,DISTILLED WATER,HYDRAULIC FLUID HAS LITTLE OR NO APPARENT EFFECT; JP-4/JP-5 AND DIESEL FUEL SLIGHT EDGE PENETRATION; NOT RESISTANT TO SKYDROL (MONSANTO HYDRAULIC FLUID
MRC	Decoded Requirement	Clear Text Reply
ADJH	Mounting Method	ADHESIVE-COATED BACK
MATT	Material	PLASTIC POLYETHYLENE