EPS-300-1 2 Part by Minnesota Mining And Mfg Co with NSN 5970-01-422-3579 - Request a Quote Now

Part Number:  EPS-300-1 2
Manufacturer:  minnesota mining and mfg co
CAGE Code:  7V059
NIIN:  014223579
INC Code:  00867
Country:  USA
NCB Code:  01

For competitive procurement options on part number EPS-300-1 2 from Minnesota Mining And Mfg Co (CAGE Code 7V059), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number EPS-300-1 2 Details:

Part number EPS-300-1 2 is manufactured by Minnesota Mining And Mfg Co and listed with the item name Insulation Sleeving Electrical. Classified under NSN 5970-01-422-3579, the NIIN of this item is 014223579, its INC is 00867, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5970 Electrical Insulators and Insulating Materials. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for EPS-300-1 2

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Get Started on Procurement

  1. Complete an RFQ Form: Fill out this form for part EPS-300-1 2 with details on your operational requirements, including your target quantity and expected turnaround time.
  2. Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
  3. Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number EPS-300-1 2 with NSN 5970-01-422-3579, 5970014223579

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5970-01-422-3579

Item PartTypeName:

INSULATION SLEEVING,ELECTRICAL

59700142235799P
CIICHCCESDPMICCriticalityENAC
U A0
Part NumberISCRNVCRNCCHCCMSDSSADC
ATUM 1/2595

Characteristics Data of NSN 5970-01-422-3579, 5970014223579

MRCCriteriaCharacteristic
AARGRELIABILITY INDICATORNOT ESTABLISHED"
ABHPOVERALL LENGTH4.000 FEET NOMINAL"
ABJHTEMP RATING-55.0 DEG CELSIUS AND 110.0 DEG CELSIUS"
ADZCENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT"
AFZLEXPANDED INSIDE DIAMETER0.472 INCHES MINIMUM"
AFZMRECOVERED INSIDE DIAMETER0.157 INCHES MAXIMUM"
AFZNRECOVERED WALL THICKNESS0.070 INCHES NOMINAL"
AGAVIII END ITEM IDENTIFICATIONMRAP - COMMON NSN - USED ON MRAP NO PERMANENT WSDC IDENTIFIED AND 1 OTHER WEAPON SYSTEM"
CQBCMINIMUM TENSILE STRENGTH1300 POUNDS PER SQUARE INCH"
FEATSPECIAL FEATURESINTERNAL ADHESIVE COATING"
FLEXFLEXIBILITYFLEXIBLE"
HUESCOLORBLACK"
MATTMATERIALPLASTIC POLYOLEFIN"
STYLSTYLE DESIGNATORSHRINKABLE"
UKBGDIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS300.0 VOLTS PER MIL /0.001 INCH/"
AARGRELIABILITY INDICATORNOT ESTABLISHED"
ABHPOVERALL LENGTH4.000 FEET NOMINAL"
ABJHTEMP RATING-55.0 DEG CELSIUS AND 110.0 DEG CELSIUS"
ADZCENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT"
AFZLEXPANDED INSIDE DIAMETER0.472 INCHES MINIMUM"
AFZMRECOVERED INSIDE DIAMETER0.157 INCHES MAXIMUM"
AFZNRECOVERED WALL THICKNESS0.070 INCHES NOMINAL"
AGAVIII END ITEM IDENTIFICATIONMRAP - COMMON NSN - USED ON MRAP NO PERMANENT WSDC IDENTIFIED AND 1 OTHER WEAPON SYSTEM"
CQBCMINIMUM TENSILE STRENGTH1300 POUNDS PER SQUARE INCH"
FEATSPECIAL FEATURESINTERNAL ADHESIVE COATING"
FLEXFLEXIBILITYFLEXIBLE"
HUESCOLORBLACK"
MATTMATERIALPLASTIC POLYOLEFIN"
STYLSTYLE DESIGNATORSHRINKABLE"
UKBGDIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS300.0 VOLTS PER MIL /0.001 INCH/"



Thank you for visiting Just Parts Unlimited!

Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top