LTH-11-H-3 Part by Moog Inc with NSN 5990-00-717-5116 - Request a Quote Now

Part Number: LTH-11-H-3

Manufacturer: moog inc

NSN: 5990-00-717-5116

CAGE Code: 99932

NIIN: 007175116

Item Name : resolver electrical

INC Code: 31780

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

FSC: 5990 Synchros and Resolvers

For competitive procurement options on part number LTH-11-H-3 from Moog Inc (CAGE Code 99932), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number LTH-11-H-3 Details:

Part number LTH-11-H-3 is manufactured by Moog Inc and listed with the item name Resolver Electrical. Classified under NSN 5990-00-717-5116, the NIIN of this item is 007175116, its INC is 31780, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5990 Synchros and Resolvers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for LTH-11-H-3

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part LTH-11-H-3 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number LTH-11-H-3 with NSN 5990-00-717-5116, 5990007175116

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-717-5116 Item PartTypeName: RESOLVER,ELECTRICAL,LINEAR	5990	007175116	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1047255	6	9	5

Characteristics Data of NSN 5990-00-717-5116, 5990007175116

MRC	Criteria	Characteristic
AAVL	PILOT DIAMETER	0.5000 INCHES MAXIMUM
ABHP	OVERALL LENGTH	2.1930 INCHES MAXIMUM
ABKK	FLANGE DIAMETER	1.0620 INCHES MAXIMUM
ABKU	FLANGE THICKNESS	0.0620 INCHES NOMINAL
ABPA	UNDERCUT DIAMETER	0.9750 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.0810 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.1200 INCHES MAXIMUM SINGLE SHAFT
ABXF	SHAFT LENGTH	0.5000 INCHES NOMINAL SINGLE SHAFT
AEBZ	SCHEMATIC DIAGRAM DESIGNATOR	1 ROTOR,1 STATOR
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AJSL	BODY SIZE	11
AJSR	ROTOR INPUT VOLTAGE RATING IN VOLTS	115.0 NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJST	ROTOR INPUT CURRENT RATING	7.0 MILLIAMPERES NOMINAL
AJSV	ROTOR INPUT ELECTRICAL POWER RATING	101.0 MILLIWATTS NOMINAL
AJSW	ZRO RESISTANCE IN OHMS	2060.00 NOMINAL
AJSY	ZSO RESISTANCE IN OHMS	68.00 NOMINAL
AJTS	ROTOR DC RESISTANCE IN OHMS	820.00 NOMINAL
AJTT	STATOR DC RESISTANCE IN OHMS	62.00 NOMINAL
AJVF	PHASE SHIFT ANGLE IN DEG	2.800 INPUT TO OUTPUT NOMINAL
AJVH	MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT	15.00
AJVP	MAXIMUM LINEAR RANGE IN DEG	-50.0 TO 50.0
AJVQ	LINEARITY IN PERCENT	0.50
AJVS	ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	9.0 CENTIMETER-GRAMS MAXIMUM
AJVT	ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	3.0 CENTIMETER-GRAMS MAXIMUM
AJWE	SHAFT RADIAL PLAY TEST POINT	0.125 INCHES MAXIMUM
AJWG	SHAFT MAXIMUM RADIAL PLAY	0.0005 INCHES
AJWH	SHAFT END PLAY	0.0003 INCHES MINIMUM AND 0.0008 INCHES MAXIMUM
AJWQ	PILOT LENGTH	0.0620 INCHES NOMINAL
AJWR	SHOULDER LENGTH	0.0620 INCHES NOMINAL
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.6000 INCHES MAXIMUM
AJXB	SHAFT MAXIMUM RUNOUT	0.0010 INCHES
CQTM	TERMINAL LOCATION	REAR
CQXQ	PLUS J ZRO REACTANCE IN OHMS	16300.00 NOMINAL
CQZS	SHAFT SLOT DEPTH	0.0320 INCHES MAXIMUM SINGLE SHAFT
CRGZ	PLUS J ZSO REACTANCE IN OHMS	127.00 NOMINAL
CRHN	SHAFT SLOT WIDTH	0.0320 INCHES MAXIMUM SINGLE SHAFT
CRSJ	SHAFT TYPE	ROUND,SLOTTED SINGLE SHAFT
CSJY	TRANSFORMATION RATIO	0.685 ROTOR TO STATOR NOMINAL
CWXK	SHAFT RADIAL PLAY DETERMINING WEIGHT	4.0 OUNCES
CWYF	SHAFT END PLAY DETERMINING WEIGHT	8.0 OUNCES
TTQY	TERMINAL TYPE AND QUANTITY	4 WIRE LEAD
AJVR	OUTPUT VOLTAGE CHANGE PER DEG IN VOLTS	0.332
AAFZ	BODY MATERIAL	STEEL,CORROSION RESISTING
AAQL	BODY STYLE	STANDARD ROUND C
AAVH	SHOULDER DIAMETER	1.0000 INCHES MAXIMUM