AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number ETH8D4L125 from Moog Inc (CAGE Code 99932), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number ETH8D4L125 Details:
Part number ETH8D4L125 is manufactured by Moog Inc and listed with the item name Synchro Control Tra. Classified under NSN 5990-00-821-4191, the NIIN of this item is 008214191, its INC is 15289, and its NCB code is 00 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5990 Synchros and Resolvers. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-821-4191 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 008214191 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 193380-1 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND A |
| ABKU | FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1200 INCHES NOMINAL SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.2730 INCHES NOMINAL SINGLE SHAFT |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.8510 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| AHCG | MAXIMUM TEMP RISE | 5.0 DEG CELSIUS |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 470.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 81.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 365.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 10.500 INPUT TO OUTPUT NOMINAL |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJWQ | PILOT LENGTH | 0.0430 INCHES NOMINAL |
| ALNF | SHAFT HOLE DIAMETER | 0.0600 INCHES NOMINAL SINGLE SHAFT |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 1770.00 NOMINAL |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 190.00 NOMINAL |
| CWAC | SHAFT TAPER LENGTH | 0.1000 INCHES NOMINAL SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
| AJSL | BODY SIZE | 8 |
| AJSP | STATOR INPUT CURRENT RATING | 30.0 MILLIAMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 73.0 MILLIWATTS NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 590.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 64.00 NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 22.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 26.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.3680 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | REAR |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 330.00 NOMINAL |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | 0.1086 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND,TAPERED,HOLLOWED SINGLE SHAFT |
| CSLT | SHAFT TAPER ANGLE IN DEG | 3.0 SINGLE SHAFT |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
