AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number CGH10TS4 B599 from Moog Inc (CAGE Code 99932), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number CGH10TS4 B599 Details:
Part number CGH10TS4 B599 is manufactured by Moog Inc and listed with the item name Synchro Transmitter. Classified under NSN 5990-00-883-2962, the NIIN of this item is 008832962, its INC is 02073, and its NCB code is 00 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5990 Synchros and Resolvers. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-883-2962 Item PartTypeName: SYNCHRO,TRANSMITTER | 5990 | 008832962 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AB1161 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 30.00 NOMINAL |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | 0.0730 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND,TAPERED,THREADED,UNDERCUT SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.0620 INCHES MAXIMUM |
| CSLT | SHAFT TAPER ANGLE IN DEG | 3.0 SINGLE SHAFT |
| CTBP | SHAFT TIP LENGTH | 0.0830 INCHES NOMINAL SINGLE SHAFT |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
| CWAC | SHAFT TAPER LENGTH | 0.1480 INCHES NOMINAL SINGLE SHAFT |
| CWJD | SHAFT UNDERCUT DIAMETER | 0.0730 INCHES NOMINAL SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.7380 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 0.9350 INCHES MINIMUM AND 0.9380 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0630 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.8350 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.4970 INCHES NOMINAL SINGLE SHAFT |
| AEDC | SHAFT UNDERCUT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| AJSL | BODY SIZE | 10 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 150.0 MILLIAMPERES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 720.0 MILLIWATTS NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 32.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 8.80 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 23.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 9.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 9.000 INPUT TO OUTPUT NOMINAL |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.00 CENTIMETER-GRAMS MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWQ | PILOT LENGTH | 0.0380 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES NOMINAL |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 170.00 NOMINAL |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
