AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number ETH-11-E-4 from Moog Inc (CAGE Code 99932), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number ETH-11-E-4 Details:
Part number ETH-11-E-4 is manufactured by Moog Inc and listed with the item name Synchro Control Tra. Classified under NSN 5990-00-901-8709, the NIIN of this item is 009018709, its INC is 15289, and its NCB code is 00 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5990 Synchros and Resolvers. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-901-8709 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 009018709 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11CT901-8709 | 3 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.2256 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.0610 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0450 INCHES MINIMUM AND 0.0550 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3590 INCHES MINIMUM AND 0.3910 INCHES MAXIMUM SINGLE SHAFT |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR,1 STATOR |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 18.2 MILLIAMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 30.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 650.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 90.00 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 605.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 365.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 59.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 4.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 OUTPUT |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0005 INCHES |
| AJWH | SHAFT END PLAY | 0.0003 INCHES MINIMUM AND 0.0008 INCHES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.8350 INCHES MAXIMUM |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 3000.00 NOMINAL |
| CQZS | SHAFT SLOT DEPTH | 0.0220 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 550.00 NOMINAL |
| CRHN | SHAFT SLOT WIDTH | 0.0220 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 295.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.0700 INCHES MAXIMUM |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8090 INCHES MINIMUM AND 0.8150 INCHES MAXIMUM |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
