AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number BDC8MU1L507 from Moog Inc (CAGE Code 99932), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number BDC8MU1L507 Details:
Part number BDC8MU1L507 is manufactured by Moog Inc and listed with the item name Synchro Differentia. Classified under NSN 5990-00-930-3109, the NIIN of this item is 009303109, its INC is 02071, and its NCB code is 00 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5990 Synchros and Resolvers. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-930-3109 Item PartTypeName: SYNCHRO,DIFFERENTIAL TRANSMITTER | 5990 | 009303109 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 917090-1 | C | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1243 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3680 INCHES MINIMUM AND 0.3880 INCHES MAXIMUM SINGLE SHAFT |
| AJSL | BODY SIZE | 8 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 96.0 MILLIAMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 210.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 38.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 28.00 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 47.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 36.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 24.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 11.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 20.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.0 CENTIMETER-GRAMS NOMINAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| AJWQ | PILOT LENGTH | 0.0430 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.3700 INCHES NOMINAL |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 122.00 NOMINAL |
| CQZS | SHAFT SLOT DEPTH | 0.0150 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM SINGLE SHAFT |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 114.00 NOMINAL |
| CRHN | SHAFT SLOT WIDTH | 0.0150 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM SINGLE SHAFT |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 13.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 1.095 ROTOR TO STATOR MINIMUM AND 1.161 ROTOR TO STATOR MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SOLDER STUD |
| AAQL | BODY STYLE | STANDARD ROUND A |
| AAVL | PILOT DIAMETER | 0.4845 INCHES MINIMUM AND 0.4850 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.9480 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.7000 INCHES NOMINAL |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
