AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number LTH10AS4 from Moog Inc (CAGE Code 99932), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number LTH10AS4 Details:
Part number LTH10AS4 is manufactured by Moog Inc and listed with the item name Resolver Electrical. Classified under NSN 5990-00-964-5296, the NIIN of this item is 009645296, its INC is 31780, and its NCB code is 00 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5990 Synchros and Resolvers. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-964-5296 Item PartTypeName: RESOLVER,ELECTRICAL,LINEAR | 5990 | 009645296 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LTH10AS4 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.8123 INCHES NOMINAL |
| AAVL | PILOT DIAMETER | 0.5000 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.6160 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 0.9370 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.0630 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.8400 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.0900 INCHES NOMINAL SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3750 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 10 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 80.0 MILLIAMPERES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 320.0 MILLIWATTS NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 49.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 30.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 90.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 9.5000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 15.00 OUTPUT |
| AJVP | MAXIMUM LINEAR RANGE IN DEG | -40.0 TO 40.0 |
| AJVQ | LINEARITY IN PERCENT | 0.50 |
| AJVR | OUTPUT VOLTAGE CHANGE PER DEG IN VOLTS | 0.4 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 15.0 CENTIMETER-GRAMS NOMINAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWH | SHAFT END PLAY | 0.0003 INCHES MINIMUM AND 0.0008 INCHES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0380 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MAXIMUM |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | 0.3000 INCHES NOMINAL SINGLE SHAFT |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 320.00 NOMINAL |
| CRHN | SHAFT SLOT WIDTH | 0.0200 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.0500 INCHES NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
