AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number ETC11KF8 from Moog Inc (CAGE Code 99932), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number ETC11KF8 Details:
Part number ETC11KF8 is manufactured by Moog Inc and listed with the item name Synchro Control Tra. Classified under NSN 5990-00-968-7685, the NIIN of this item is 009687685, its INC is 15289, and its NCB code is 00 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5990 Synchros and Resolvers. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-968-7685 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 009687685 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10049275 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.7520 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.0610 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM FRONT SHAFT |
| ABXF | SHAFT LENGTH | 0.5620 INCHES NOMINAL FRONT SHAFT |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 16.0 MILLIAMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 220.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 1030.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 720.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 350.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 510.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 4.800 INPUT TO OUTPUT MAXIMUM |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 6.0 CENTIMETER-GRAMS MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.8350 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 5300.00 NOMINAL |
| CQZS | SHAFT SLOT DEPTH | 0.0220 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 3100.00 NOMINAL |
| CRHN | SHAFT SLOT WIDTH | 0.0220 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED BOTH SHAFTS |
| CRSY | ALIGNMENT HOLE DEPTH | 0.0700 INCHES NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6250 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | REAR SHAFT DIM. 0.3550 IN. NOM LG,0.0880 IN. MIN,0.0900 IN. MAX LG |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
