HGC 11 RE 6 F798 Part by Moog Inc with NSN 5990-01-384-9747 - Request a Quote Now

Part Number: HGC 11 RE 6 F798

Manufacturer: moog inc

NSN: 5990-01-384-9747

CAGE Code: 99932

NIIN: 013849747

Item Name : synchro transmitter

INC Code: 02073

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

FSC: 5990 Synchros and Resolvers

For competitive procurement options on part number HGC 11 RE 6 F798 from Moog Inc (CAGE Code 99932), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number HGC 11 RE 6 F798 Details:

Part number HGC 11 RE 6 F798 is manufactured by Moog Inc and listed with the item name Synchro Transmitter. Classified under NSN 5990-01-384-9747, the NIIN of this item is 013849747, its INC is 02073, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5990 Synchros and Resolvers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for HGC 11 RE 6 F798

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part HGC 11 RE 6 F798 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number HGC 11 RE 6 F798 with NSN 5990-01-384-9747, 5990013849747

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-01-384-9747 Item PartTypeName: SYNCHRO,TRANSMITTER	5990	013849747	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
867-015-001	5	2	3

Characteristics Data of NSN 5990-01-384-9747, 5990013849747

MRC	Criteria	Characteristic
AAFZ	BODY MATERIAL	STEEL, CORROSION RESISTING"
AAQL	BODY STYLE	STANDARD ROUND C"
AAVH	SHOULDER DIAMETER	0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM"
AAVL	PILOT DIAMETER	0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM"
ABHP	OVERALL LENGTH	1.7240 INCHES MAXIMUM"
ABKK	FLANGE DIAMETER	1.0610 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM"
ABKU	FLANGE THICKNESS	0.0930 INCHES NOMINAL"
ABPA	UNDERCUT DIAMETER	0.9750 INCHES NOMINAL"
ABPC	UNDERCUT WIDTH	0.0500 INCHES NOMINAL"
ABWV	SHAFT DIAMETER	0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT"
ABXF	SHAFT LENGTH	0.3600 INCHES MINIMUM SINGLE SHAFT AND 0.3900 INCHES MAXIMUM SINGLE SHAFT"
AHCG	MAXIMUM TEMP RISE	125.0 DEG CELSIUS"
AJSL	BODY SIZE	11"
AJSR	ROTOR INPUT VOLTAGE RATING IN VOLTS	115.0 NOMINAL"
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL"
AJST	ROTOR INPUT CURRENT RATING	45.0 MILLIAMPERES NOMINAL"
AJSV	ROTOR INPUT ELECTRICAL POWER RATING	0.77 WATTS FINISHED-CHAMFERED"
AJSW	ZRO RESISTANCE IN OHMS	350.00 NOMINAL"
AJSY	ZSO RESISTANCE IN OHMS	4.30 NOMINAL"
AJTC	ZSS RESISTANCE IN OHMS	5.00 NOMINAL"
AJTS	ROTOR DC RESISTANCE IN OHMS	170.00 MINIMUM AND 220.00 MAXIMUM"
AJTT	STATOR DC RESISTANCE IN OHMS	3.20 MINIMUM AND 4.00 MAXIMUM"
AJVG	MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	30.00 INPUT"
AJWH	SHAFT END PLAY	0.0010 INCHES MINIMUM AND 0.0025 INCHES MAXIMUM"
AJWQ	PILOT LENGTH	0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS"
AJWR	SHOULDER LENGTH	0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS"
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.6000 INCHES MAXIMUM"
AJXB	SHAFT MAXIMUM RUNOUT	0.0010 INCHES"
CQTM	TERMINAL LOCATION	REAR"
CQXQ	PLUS J ZRO REACTANCE IN OHMS	3000.00 NOMINAL"
CRGZ	PLUS J ZSO REACTANCE IN OHMS	24.60 NOMINAL"
CRSJ	SHAFT TYPE	ROUND SINGLE SHAFT"
CSFG	PLUS J ZSS REACTANCE IN OHMS	2.50 NOMINAL"
CSJY	TRANSFORMATION RATIO	0.1026 ROTOR TO STATOR NOMINAL"
CWYF	SHAFT END PLAY DETERMINING WEIGHT	8.5 OUNCES"
FEAT	SPECIAL FEATURES	SLOT OPTIONAL ON SHAFT"
TTQY	TERMINAL TYPE AND QUANTITY	5 WIRE LEAD"
AAFZ	BODY MATERIAL	STEEL, CORROSION RESISTING"
AAQL	BODY STYLE	STANDARD ROUND C"
AAVH	SHOULDER DIAMETER	0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM"
AAVL	PILOT DIAMETER	0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM"
ABHP	OVERALL LENGTH	1.7240 INCHES MAXIMUM"
ABKK	FLANGE DIAMETER	1.0610 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM"
ABKU	FLANGE THICKNESS	0.0930 INCHES NOMINAL"
ABPA	UNDERCUT DIAMETER	0.9750 INCHES NOMINAL"
ABPC	UNDERCUT WIDTH	0.0500 INCHES NOMINAL"
ABWV	SHAFT DIAMETER	0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT"
ABXF	SHAFT LENGTH	0.3600 INCHES MINIMUM SINGLE SHAFT AND 0.3900 INCHES MAXIMUM SINGLE SHAFT"
AHCG	MAXIMUM TEMP RISE	125.0 DEG CELSIUS"
AJSL	BODY SIZE	11"
AJSR	ROTOR INPUT VOLTAGE RATING IN VOLTS	115.0 NOMINAL"
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL"
AJST	ROTOR INPUT CURRENT RATING	45.0 MILLIAMPERES NOMINAL"
AJSV	ROTOR INPUT ELECTRICAL POWER RATING	0.77 WATTS FINISHED-CHAMFERED"
AJSW	ZRO RESISTANCE IN OHMS	350.00 NOMINAL"
AJSY	ZSO RESISTANCE IN OHMS	4.30 NOMINAL"
AJTC	ZSS RESISTANCE IN OHMS	5.00 NOMINAL"
AJTS	ROTOR DC RESISTANCE IN OHMS	170.00 MINIMUM AND 220.00 MAXIMUM"
AJTT	STATOR DC RESISTANCE IN OHMS	3.20 MINIMUM AND 4.00 MAXIMUM"
AJVG	MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	30.00 INPUT"
AJWH	SHAFT END PLAY	0.0010 INCHES MINIMUM AND 0.0025 INCHES MAXIMUM"
AJWQ	PILOT LENGTH	0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS"
AJWR	SHOULDER LENGTH	0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS"
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.6000 INCHES MAXIMUM"
AJXB	SHAFT MAXIMUM RUNOUT	0.0010 INCHES"
CQTM	TERMINAL LOCATION	REAR"
CQXQ	PLUS J ZRO REACTANCE IN OHMS	3000.00 NOMINAL"
CRGZ	PLUS J ZSO REACTANCE IN OHMS	24.60 NOMINAL"
CRSJ	SHAFT TYPE	ROUND SINGLE SHAFT"
CSFG	PLUS J ZSS REACTANCE IN OHMS	2.50 NOMINAL"
CSJY	TRANSFORMATION RATIO	0.1026 ROTOR TO STATOR NOMINAL"
CWYF	SHAFT END PLAY DETERMINING WEIGHT	8.5 OUNCES"
FEAT	SPECIAL FEATURES	SLOT OPTIONAL ON SHAFT"
TTQY	TERMINAL TYPE AND QUANTITY	5 WIRE LEAD"