SS302-2477255-3L1 Part by National Instruments Corporation with NSN 5975-00-220-2275 - Request a Quote Now

Part Number: SS302-2477255-3L1

Manufacturer: national instruments corporation

NSN: 5975-00-220-2275

CAGE Code: 03950

NIIN: 002202275

Item Name : stuffing tube

INC Code: 00882

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

FSC: 5975 Electrical Hardware and Supplies

For competitive procurement options on part number SS302-2477255-3L1 from National Instruments Corporation (CAGE Code 03950), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number SS302-2477255-3L1 Details:

Part number SS302-2477255-3L1 is manufactured by National Instruments Corporation and listed with the item name Stuffing Tube. Classified under NSN 5975-00-220-2275, the NIIN of this item is 002202275, its INC is 00882, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5975 Electrical Hardware and Supplies. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SS302-2477255-3L1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part SS302-2477255-3L1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number SS302-2477255-3L1 with NSN 5975-00-220-2275, 5975002202275

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5975-00-220-2275 Item PartTypeName: STUFFING TUBE	5975	002202275	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
MX8210B	2	1	5

Characteristics Data of NSN 5975-00-220-2275, 5975002202275

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A BOTH ENDS
AAJD	THREAD CLASS	2A FIRST END
AAJD	THREAD CLASS	2B SECOND END
AAJF	THREAD DIRECTION	RIGHT-HAND BOTH ENDS
AASA	THREAD LENGTH	0.343 INCHES NOMINAL SECOND END
AASA	THREAD LENGTH	0.468 INCHES NOMINAL BOTH ENDS
AASA	THREAD LENGTH	1.128 INCHES NOMINAL FIRST END
AAWY	COUNTERBORE DIAMETER	0.775 INCHES MINIMUM AND 1.067 INCHES MAXIMUM
AAWZ	COUNTERBORE DEPTH	0.531 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
ABHP	OVERALL LENGTH	7.375 INCHES NOMINAL
ABWK	ITEM ACCOMMODATED MAXIMUM THICKNESS	5.000 INCHES
ABXV	BORE DIAMETER	0.390 INCHES MINIMUM AND 1.750 INCHES MAXIMUM
ADAR	BODY OUTSIDE DIAMETER	1.745 INCHES MINIMUM AND 1.750 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	2.750 INCHES NOMINAL
ADGE	BORE LENGTH	5.381 INCHES NOMINAL
ADGP	FIRST END CHAMFER DEPTH	0.062 INCHES NOMINAL
ADGV	THREAD RELIEF LENGTH	0.188 INCHES NOMINAL
ADGW	THREAD RELIEF DEPTH	0.036 INCHES NOMINAL
ADHF	INSIDE RECESS LENGTH	0.219 INCHES NOMINAL
ADHM	FIRST PACKING CHAMBER INSIDE DIAMETER	0.518 INCHES MINIMUM AND 0.523 INCHES MAXIMUM
ADHP	FIRST PACKING CHAMBER LENGTH	0.156 INCHES NOMINAL
ADJG	PACKING CHAMBER QUANTITY	1
AXGY	MOUNTING METHOD	FLANGE AND LOCKNUT
CMLP	THREAD QUANTITY PER INCH	14 BOTH ENDS
CQJX	NOMINAL THREAD SIZE	1.000 INCHES BOTH ENDS
CRTL	CRITICALITY CODE JUSTIFICATION	ZZZY
CSTP	SECOND END CHAMFER ANGLE	20.0 DEGREES NOMINAL
MATT	MATERIAL	NICKEL ALLOY OVERALL
STYL	STYLE DESIGNATOR	INTERNAL-EXTERNAL-DOUBLE
THSD	THREAD SERIES DESIGNATOR	UNS BOTH ENDS
ZZZY	REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	QUALITY CONTROL IAW NAVSHIPS 0948-045-7010 MATERIAL IDENTIFICATION AND CONTROL INSTRUCTION FOR LEVEL 1 ITEMS