2D1-03977 Part by Oldenburg Group Incorporated with NSN 3040-01-449-0153 - Request a Quote Now

Part Number: 2D1-03977

Manufacturer: oldenburg group incorporated

NSN: 3040-01-449-0153

CAGE Code: 34712

NIIN: 014490153

Item Name : gearshaft spur

INC Code: 60541

Country: USA

NCB Code: 01

FSG: 30 Mechanical Power Transmission Equipment

FSC: 3040 Miscellaneous Power Transmission Equipment

For competitive procurement options on part number 2D1-03977 from Oldenburg Group Incorporated (CAGE Code 34712), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 2D1-03977 Details:

Part number 2D1-03977 is manufactured by Oldenburg Group Incorporated and listed with the item name Gearshaft Spur. Classified under NSN 3040-01-449-0153, the NIIN of this item is 014490153, its INC is 60541, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 30 Mechanical Power Transmission Equipment and Class (FSC) 3040 Miscellaneous Power Transmission Equipment. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 2D1-03977

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 2D1-03977 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 2D1-03977 with NSN 3040-01-449-0153, 3040014490153

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3040-01-449-0153 Item PartTypeName: GEARSHAFT,SPUR	3040	014490153	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
2D1-03977	5	2	3

Characteristics Data of NSN 3040-01-449-0153, 3040014490153

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	15.000 INCHES NOMINAL"
AGAV	END ITEM IDENTIFICATION	STRATEGIC SEALIFT CONVERSION SHIPS CLASS"
AJLA	TEETH QUANTITY	23"
AJWS	GEAR OUTSIDE DIAMETER	6.240 INCHES MINIMUM AND 6.250 INCHES MAXIMUM"
ANJS	SHAFT END TYPE	PLAIN AND PLAIN"
AQGH	DIAMETRAL PITCH	4"
AQPL	FACE WIDTH	4.250 INCHES NOMINAL"
CRSJ	SHAFT TYPE	SHOULDERED"
CWPP	PRESSURE ANGLE	25.0000 DEGREES"
CYEQ	SHAFT MATERIAL	STEEL COMP 4820"
CYER	GEAR MATERIAL	STEEL COMP 4820"
CYES	HARDNESS RATING AND LOCATION	55.0 ROCKWELL C MINIMUM TEETH AND 60.0 ROCKWELL C MAXIMUM TEETH"
CYET	SHAFT LARGEST DIAMETER	4.000 INCHES NOMINAL"
CYEU	GEAR LOCATION ON SHAFT	OFF CENTER BETWEEN ENDS OF SHAFT"
CYEV	LONGER SHAFT SEGMENT LENGTH	9.125 INCHES NOMINAL"
CYEW	SHAFT END SIZE	3.348 INCHES AND 3.348 INCHES"
FEAT	SPECIAL FEATURES	SPHERICAL ROLLER BEARING ON EACH END OF SHAFT"
ABHP	OVERALL LENGTH	15.000 INCHES NOMINAL"
AGAV	END ITEM IDENTIFICATION	STRATEGIC SEALIFT CONVERSION SHIPS CLASS"
AJLA	TEETH QUANTITY	23"
AJWS	GEAR OUTSIDE DIAMETER	6.240 INCHES MINIMUM AND 6.250 INCHES MAXIMUM"
ANJS	SHAFT END TYPE	PLAIN AND PLAIN"
AQGH	DIAMETRAL PITCH	4"
AQPL	FACE WIDTH	4.250 INCHES NOMINAL"
CRSJ	SHAFT TYPE	SHOULDERED"
CWPP	PRESSURE ANGLE	25.0000 DEGREES"
CYEQ	SHAFT MATERIAL	STEEL COMP 4820"
CYER	GEAR MATERIAL	STEEL COMP 4820"
CYES	HARDNESS RATING AND LOCATION	55.0 ROCKWELL C MINIMUM TEETH AND 60.0 ROCKWELL C MAXIMUM TEETH"
CYET	SHAFT LARGEST DIAMETER	4.000 INCHES NOMINAL"
CYEU	GEAR LOCATION ON SHAFT	OFF CENTER BETWEEN ENDS OF SHAFT"
CYEV	LONGER SHAFT SEGMENT LENGTH	9.125 INCHES NOMINAL"
CYEW	SHAFT END SIZE	3.348 INCHES AND 3.348 INCHES"
FEAT	SPECIAL FEATURES	SPHERICAL ROLLER BEARING ON EACH END OF SHAFT"