L1-6705 Part by Pettibone Inc with NSN 3040-00-021-1835 - Request a Quote Now

Part Number: L1-6705

Manufacturer: pettibone inc

NSN: 3040-00-021-1835

CAGE Code: 46717

NIIN: 000211835

Item Name : shaft shouldered

INC Code: 22914

Country: USA

NCB Code: 00

FSG: 30 Mechanical Power Transmission Equipment

FSC: 3040 Miscellaneous Power Transmission Equipment

For competitive procurement options on part number L1-6705 from Pettibone Inc (CAGE Code 46717), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number L1-6705 Details:

Part number L1-6705 is manufactured by Pettibone Inc and listed with the item name Shaft Shouldered. Classified under NSN 3040-00-021-1835, the NIIN of this item is 000211835, its INC is 22914, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 30 Mechanical Power Transmission Equipment and Class (FSC) 3040 Miscellaneous Power Transmission Equipment. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for L1-6705

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part L1-6705 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 3040-00-021-1835, 3040000211835

MRC	Criteria	Characteristic
AAGZ	FIRST END STYLE	UNTHREADED CROSS DRILLED
AAHN	END SIMILARITY	NOT IDENTICAL
AAHP	SECOND END STYLE	CROSS DRILLED HOLE AND SLOTTED
ABHP	OVERALL LENGTH	6.437 INCHES NOMINAL
AKTN	SECOND END SLOT WIDTH	0.406 INCHES NOMINAL
AMDL	FIRST END DIAMETER	0.6220 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM
AMDX	FIRST END HOLE DIAMETER	0.1880 INCHES NOMINAL
AMFZ	SECOND END DIAMETER	0.7470 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
AMGR	SECOND END SLOT DEPTH	1.000 INCHES NOMINAL
AMGS	SECOND END HOLE DIAMETER	0.3750 INCHES NOMINAL
AMGT	SECOND END DISTANCE FROM HOLE CENTER TO END	0.250 INCHES NOMINAL
AMHD	SECOND END HOLE DEPTH	0.747 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
ATPC	STEP QUANTITY	2
CSPY	LARGEST STEP DIAMETER	0.747 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
MATT	MATERIAL	STEEL COMP 1141