SCD2035 Part by Profile Gear Corp with NSN 3040-00-528-0276 - Request a Quote Now

Part Number: SCD2035

Manufacturer: profile gear corp

NSN: 3040-00-528-0276

CAGE Code: 63689

NIIN: 005280276

Item Name : shaft assembly flex

INC Code: 20315

Country: USA

NCB Code: 00

FSG: 30 Mechanical Power Transmission Equipment

FSC: 3040 Miscellaneous Power Transmission Equipment

For competitive procurement options on part number SCD2035 from Profile Gear Corp (CAGE Code 63689), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number SCD2035 Details:

Part number SCD2035 is manufactured by Profile Gear Corp and listed with the item name Shaft Assembly Flex. Classified under NSN 3040-00-528-0276, the NIIN of this item is 005280276, its INC is 20315, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 30 Mechanical Power Transmission Equipment and Class (FSC) 3040 Miscellaneous Power Transmission Equipment. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SCD2035

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part SCD2035 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number SCD2035 with NSN 3040-00-528-0276, 3040005280276

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3040-00-528-0276 Item PartTypeName: SHAFT ASSEMBLY,FLEXIBLE	3040	005280276	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
SCD2035	6	9	5

Characteristics Data of NSN 3040-00-528-0276, 3040005280276

MRC	Criteria	Characteristic
AAJF	THREAD DIRECTION	RIGHT-HAND BOTH ENDS
AAUJ	SPLINE MAJOR DIAMETER	0.299 INCHES MINIMUM AND 0.303 INCHES MAXIMUM BOTH ENDS
ABHP	OVERALL LENGTH	91.000 INCHES NOMINAL
ABSA	SPLINE QUANTITY	12 BOTH ENDS
ABSC	SPLINE MINOR DIAMETER	0.213 INCHES MINIMUM AND 0.217 INCHES MAXIMUM BOTH ENDS
ADMS	WRENCHING FACILITY OUTSIDE DIAMETER	0.750 INCHES NOMINAL BOTH ENDS
AECT	THREAD DEPTH	0.313 INCHES NOMINAL BOTH ENDS
AEDN	TIP LENGTH	0.500 INCHES NOMINAL BOTH ENDS
AGJS	PITCH DIAMETER	0.251 INCHES MINIMUM AND 0.255 INCHES MAXIMUM BOTH ENDS
AJXJ	CORE MATERIAL	STEEL
AJYP	SCREW THREAD SERIES DESIGNATOR	UNS BOTH ENDS
AKMH	CORE DIAMETER	0.147 INCHES MINIMUM AND 0.153 INCHES MAXIMUM
APJC	THREAD LOCATION	INTERNAL BOTH ENDS
APTD	END TYPE	ROUND,INTERNAL SPLINED BOTH ENDS
AWZY	END CONNECTION TYPE	THREADED INTERNAL BOTH ENDS
AXFG	SPLINE PRESSURE ANGLE IN DEG	14.5 BOTH ENDS
AXFH	SPLINE LENGTH	0.2505 INCHES NOMINAL BOTH ENDS
AXYS	SPLINE TYPE	STRAIGHT BOTH ENDS
BDRL	SETSCREW	NOT INCLUDED BOTH ENDS
BJPS	CASING MATERIAL	STEEL
BPPL	WRENCHING FACILITY TYPE	KNURLED SURFACE BOTH ENDS
CFQW	CROSS SECTION SIZE AND LOCATION	0.406 INCHES NOMINAL DIAMETER BOTH ENDS
CFRM	TORSIONAL DEFLECTION RATING	7 DEG FT-LB IN. WINDING AND UNWINDING
CFRN	CASING SURFACE TREATMENT	ZINC COATED
CFRP	CASING LENGTH BETWEEN FERRULES	90.000 INCHES NOMINAL
CFRQ	CASING OUTSIDE DIAMETER	0.335 INCHES MAXIMUM
CFRT	SWIVEL END	NOT PROVIDED BOTH ENDS
CFRW	END OVERALL DIAMETER	0.750 INCHES NOMINAL BOTH ENDS
CFRY	LUBRICATION FITTING	NOT PROVIDED BOTH ENDS
CFRZ	CORE OVERALL LENGTH	91.000 INCHES NOMINAL
CFSB	CORE ROTATION DIRECTION	CLOCKWISE
CFSL	CORE REMOVABILITY	REMOVABLE
ZZZY	REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	AS DIFFERENTIATED BY CASING LENGTH BETWEEN FERRULES; CORE OVERALL LENGTH; OVERALL LENGTH