V08-005-414 Part by Project Manager Amphibious Lighters with NSN 3040-01-422-7824 - Request a Quote Now

Part Number: V08-005-414

Manufacturer: project manager amphibious lighters

NSN: 3040-01-422-7824

CAGE Code: 25169

NIIN: 014227824

Item Name : bell crank

INC Code: 22321

Country: USA

NCB Code: 01

FSG: 30 Mechanical Power Transmission Equipment

FSC: 3040 Miscellaneous Power Transmission Equipment

For competitive procurement options on part number V08-005-414 from Project Manager Amphibious Lighters (CAGE Code 25169), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number V08-005-414 Details:

Part number V08-005-414 is manufactured by Project Manager Amphibious Lighters and listed with the item name Bell Crank. Classified under NSN 3040-01-422-7824, the NIIN of this item is 014227824, its INC is 22321, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 30 Mechanical Power Transmission Equipment and Class (FSC) 3040 Miscellaneous Power Transmission Equipment. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for V08-005-414

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part V08-005-414 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number V08-005-414 with NSN 3040-01-422-7824, 3040014227824

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3040-01-422-7824 Item PartTypeName: BELL CRANK	3040	014227824	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
V08-005-414	5	9	3

Characteristics Data of NSN 3040-01-422-7824, 3040014227824

MRC	Criteria	Characteristic
ABXV	BORE DIAMETER	1.005 INCHES NOMINAL"
AGAV	END ITEM IDENTIFICATION	LARC V"
CZLM	CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL	1.687 INCHES NOMINAL 1ST END"
CZLM	CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL	2.750 INCHES NOMINAL 2ND END"
CZLN	END HOLE/BALL DIAMETER	0.531 INCHES NOMINAL 1ST END"
MATT	III MATERIAL	STEEL"
STYL	STYLE DESIGNATOR	TWO PARALLEL HOLES, OTHER ARM BALL END"
ABXV	BORE DIAMETER	1.005 INCHES NOMINAL"
AGAV	END ITEM IDENTIFICATION	LARC V"
CZLM	CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL	1.687 INCHES NOMINAL 1ST END"
CZLM	CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL	2.750 INCHES NOMINAL 2ND END"
CZLN	END HOLE/BALL DIAMETER	0.531 INCHES NOMINAL 1ST END"
MATT	III MATERIAL	STEEL"
STYL	STYLE DESIGNATOR	TWO PARALLEL HOLES, OTHER ARM BALL END"