KDM001-50CA5J Part by R Kern Engineering And Manufacturing with NSN 5935-01-460-4678 - Request a Quote Now

Part Number: KDM001-50CA5J

Manufacturer: r kern engineering and manufacturing

NSN: 5935-01-460-4678

CAGE Code: 50619

NIIN: 014604678

Item Name : backshell electrical connector

INC Code: 67169

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

FSC: 5935 Connectors Electrical

For competitive procurement options on part number KDM001-50CA5J from R Kern Engineering And Manufacturing (CAGE Code 50619), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number KDM001-50CA5J Details:

Part number KDM001-50CA5J is manufactured by R Kern Engineering And Manufacturing and listed with the item name Backshell Electrical Connector. Classified under NSN 5935-01-460-4678, the NIIN of this item is 014604678, its INC is 67169, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5935 Connectors Electrical. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for KDM001-50CA5J

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part KDM001-50CA5J with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number KDM001-50CA5J with NSN 5935-01-460-4678, 5935014604678

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5935-01-460-4678 Item PartTypeName: BACKSHELL,ELECTRICAL CONNECTOR	5935	014604678	0	P	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1214498-233	5	2	7

Characteristics Data of NSN 5935-01-460-4678, 5935014604678

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
ABAH	SEAL MATERIAL	RUBBER, NEOPRENE LATEX AND ALUMINUM ALLOY"
ABHP	OVERALL LENGTH	2.640 INCHES MINIMUM AND 2.666 INCHES MAXIMUM"
ABKQ	CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	2.396 INCHES MINIMUM AND 2.416 INCHES MAXIMUM"
ABKW	OVERALL HEIGHT	1.360 INCHES NOMINAL"
ABMK	OVERALL WIDTH	0.639 INCHES NOMINAL"
AGAV	III END ITEM IDENTIFICATION	NEXT GENERATION RADAR (NEXRAD)"
AGTW	CABLE OPENING DIAMETER	1.250 INCHES MAXIMUM"
AKRD	CABLE OPENING QUANTITY	1"
AKRF	SEAL TYPE	GASKET"
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	2 SCREW"
CQJX	NOMINAL THREAD SIZE	0.112 INCHES"
FEAT	SPECIAL FEATURES	NON-ENVIRONMENTAL, EMI/RFI/EMP SHIELDING, FOR MIL-C-24308 TYPE 50 CONTACT CONNECTORS"
MATT	MATERIAL	ALUMINUM ALLOY"
SFTT	SURFACE TREATMENT	NICKEL"
STYL	STYLE DESIGNATOR	HOOD, TOP OPENING W/CLAMP"
THSD	THREAD SERIES DESIGNATOR	UNC"
AAJD	THREAD CLASS	2A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
ABAH	SEAL MATERIAL	RUBBER, NEOPRENE LATEX AND ALUMINUM ALLOY"
ABHP	OVERALL LENGTH	2.640 INCHES MINIMUM AND 2.666 INCHES MAXIMUM"
ABKQ	CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	2.396 INCHES MINIMUM AND 2.416 INCHES MAXIMUM"
ABKW	OVERALL HEIGHT	1.360 INCHES NOMINAL"
ABMK	OVERALL WIDTH	0.639 INCHES NOMINAL"
AGAV	III END ITEM IDENTIFICATION	NEXT GENERATION RADAR (NEXRAD)"
AGTW	CABLE OPENING DIAMETER	1.250 INCHES MAXIMUM"
AKRD	CABLE OPENING QUANTITY	1"
AKRF	SEAL TYPE	GASKET"
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	2 SCREW"
CQJX	NOMINAL THREAD SIZE	0.112 INCHES"
FEAT	SPECIAL FEATURES	NON-ENVIRONMENTAL, EMI/RFI/EMP SHIELDING, FOR MIL-C-24308 TYPE 50 CONTACT CONNECTORS"
MATT	MATERIAL	ALUMINUM ALLOY"
SFTT	SURFACE TREATMENT	NICKEL"
STYL	STYLE DESIGNATOR	HOOD, TOP OPENING W/CLAMP"
THSD	THREAD SERIES DESIGNATOR	UNC"