APL 2110-4019-1 Part by Sensata Technologies Inc with NSN 5925-01-102-9360 - Request a Quote Now

Part Number: APL 2110-4019-1

Manufacturer: sensata technologies inc

NSN: 5925-01-102-9360

CAGE Code: 81541

NIIN: 011029360

Item Name : circuit breaker

INC Code: 00136

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

FSC: 5925 Circuit Breakers

For competitive procurement options on part number APL 2110-4019-1 from Sensata Technologies Inc (CAGE Code 81541), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number APL 2110-4019-1 Details:

Part number APL 2110-4019-1 is manufactured by Sensata Technologies Inc and listed with the item name Circuit Breaker. Classified under NSN 5925-01-102-9360, the NIIN of this item is 011029360, its INC is 00136, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5925 Circuit Breakers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for APL 2110-4019-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part APL 2110-4019-1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number APL 2110-4019-1 with NSN 5925-01-102-9360, 5925011029360

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5925-01-102-9360 Item Description: Circuit Breaker	5925	011029360	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
Apl 2110-4019-1	5	2	3

Characteristics Data of NSN 5925-01-102-9360, 5925011029360

MRC	Criteria	Characteristic
AAQL	BODY STYLE	MULTIPOLE-MULTIPLE ACTUATOR TYPE
ADAQ	BODY LENGTH	2.490 INCHES NOMINAL
ADAT	BODY WIDTH	3.060 INCHES MAXIMUM
ADTV	CASE MATERIAL	PLASTIC
AEBP	CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	1.940 INCHES NOMINAL
AEBQ	CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	0.750 INCHES NOMINAL
AEBY	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	2.060 INCHES NOMINAL
AEHA	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.750 INCHES NOMINAL
AJEC	BOSS HEIGHT	0.150 INCHES NOMINAL
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	2.625 INCHES NOMINAL
AKPX	POLE QUANTITY	4
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	8 THREADED HOLE
BBRG	STORAGE TYPE	GENERAL PURPOSE WAREHOUSE
CMLP	THREAD QUANTITY PER INCH	32
CPLM	MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	50.0 AMPERES AC FIRST LOCATION
CPLM	MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	50.0 AMPERES AC SECOND LOCATION
CPLM	MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	50.0 AMPERES AC THIRD LOCATION
CPRF	OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	250.0 AC FIRST LOCATION
CPRF	OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	250.0 AC SECOND LOCATION
CPRF	OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	250.0 AC THIRD LOCATION
CPRG	MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	1000.0 AC FIRST LOCATION
CPRG	MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	1000.0 AC SECOND LOCATION
CPRG	MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	1000.0 AC THIRD LOCATION
CPRH	CIRCUIT PROTECTION TYPE	OVERCURRENT FIRST LOCATION
CPRH	CIRCUIT PROTECTION TYPE	OVERCURRENT SECOND LOCATION
CPRH	CIRCUIT PROTECTION TYPE	OVERCURRENT THIRD LOCATION
CPRJ	TRIP RELEASE METHOD	MAGNETIC-HYDRAULIC FIRST LOCATION
CPRJ	TRIP RELEASE METHOD	MAGNETIC-HYDRAULIC SECOND LOCATION
CPRJ	TRIP RELEASE METHOD	MAGNETIC-HYDRAULIC THIRD LOCATION
CPRL	TRIP RELEASE CHARACTERISTIC	TIME DELAY FIRST LOCATION
CPRL	TRIP RELEASE CHARACTERISTIC	TIME DELAY SECOND LOCATION
CPRL	TRIP RELEASE CHARACTERISTIC	TIME DELAY THIRD LOCATION
CPRN	ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	125.0 FIRST LOCATION
CPRN	ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	125.0 SECOND LOCATION
CPRN	ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	125.0 THIRD LOCATION
CPRQ	RESET METHOD	MANUAL
CPRR	MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
CPRT	MANUAL ACTUATOR TYPE AND QUANTITY	4 TOGGLE
CPRW	ACTUATOR FUNCTION	TRIP-RESET
CPRX	ACTUATOR POSITION DESIGNATION	AT EACH POLE
CPRY	EXTERNAL ACTUATOR LINKAGE ARRANGEMENT	ONE, TWO, THREE, AND FOUR LINKED
CPSM	INTERNAL TRIP RELEASE CONFIGURATION	RELAY TRIP FIRST LOCATION
CPSM	INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP SECOND LOCATION
CPSM	INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP THIRD LOCATION
CQJX	NOMINAL THREAD SIZE	0.138 INCHES
CQWN	TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	2.000 MINIMUM AT 200 PCT FIRST LOCATION AND 12.000 MAXIMUM AT 200 PCT FIRST LOCATION
CQWN	TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	2.000 MINIMUM AT 200 PCT SECOND LOCATION AND 12.000 MAXIMUM AT 200 PCT SECOND LOCATION
CQWN	TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	2.000 MINIMUM AT 200 PCT THIRD LOCATION AND 12.000 MAXIMUM AT 200 PCT THIRD LOCATION
CQXF	INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	FUNGUS RESISTANT AND MOISTURE RESISTANT
FEAT	SPECIAL FEATURES	POLE NUMBER 4 IS A DUMMY POLE
FREQ	FREQUENCY IN HERTZ	400.0 FIRST LOCATION
FREQ	FREQUENCY IN HERTZ	400.0 SECOND LOCATION
FREQ	FREQUENCY IN HERTZ	400.0 THIRD LOCATION
THSD	THREAD SERIES DESIGNATOR	UNC
TTQY	TERMINAL TYPE AND QUANTITY	10 THREADED STUD