AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number 2C20C1-150 from Sheffer Corporation (CAGE Code 05283), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number 2C20C1-150 Details:
Part number 2C20C1-150 is manufactured by Sheffer Corporation and listed with the item name Cylinder Assembly A. Classified under NSN 2520-00-820-8360, the NIIN of this item is 008208360, its INC is 31310, and its NCB code is 00 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 25 Vehicular Equipment Components and Class (FSC) 2520 Vehicle Power Transmission Components. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | ALUMINUM ALLOY OR BRASS |
| AAHB | FIRST END OUTSIDE DIAMETER | 0.500 INCHES NOMINAL |
| ABDR | MOUNTING PROVISION | UNTHREADED MOUNTING HOLES |
| ABKW | OVERALL HEIGHT | 2.380 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.380 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 2.000 INCHES NOMINAL |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 1.000 INCHES NOMINAL |
| AMQZ | COMPRESSED LENGTH | 6.000 INCHES NOMINAL |
| ATEM | EXTENDED LENGTH | 7.000 INCHES NOMINAL |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| BGST | PRESSURE RATING | 250.0 POUNDS PER SQUARE INCH NOMINAL |
| CKRM | INTEGRAL VALVE OPERATION METHOD | HYDRAULIC |
| CKSD | DESIGN CHARACTERISTICS | DOUBLE ACTING SINGLE CYLINDER |
| CKSF | FIRST PISTON ROD END STYLE | EXTERNAL THREADED |
| CKSG | FIRST PISTON ROD END THREAD SERIES DESIGNATOR | UNF |
| CKSH | FIRST PISTON ROD END THREAD DIAMETER | 0.500 INCHES NOMINAL |
| CKSJ | FIRST PISTON ROD END THREAD QUANTITY PER INCH | 20 |
| CKSK | FIRST PISTON ROD END THREAD CLASS | 2A |
| CKSL | FIRST PISTON ROD END THREAD DIRECTION | RIGHT-HAND |
| CLML | MOUNTING TYPE AND LOCATION | FORK CYLINDER HEAD END |
| CLMQ | MOUNTING FACILITY DIAMETER | 0.500 INCHES NOMINAL |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 0.750 INCHES NOMINAL |
| CLMS | PORT LOCATION AND QUANTITY | 1 CYLINDER HEAD END |
| CLMS | PORT LOCATION AND QUANTITY | 1 PISTON ROD END |
| CLMT | PORT STYLE | GASKET SEAL |
| CLMW | PORT THREAD SERIES DESIGNATOR | NPT |
| CLMZ | PORT NOMINAL PIPE THREAD SIZE | 0.250 INCHES |
| AAFZ | BODY MATERIAL | ALUMINUM ALLOY OR BRASS |
| AAHB | FIRST END OUTSIDE DIAMETER | 0.500 INCHES NOMINAL |
| ABDR | MOUNTING PROVISION | UNTHREADED MOUNTING HOLES |
| ABKW | OVERALL HEIGHT | 2.380 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.380 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 2.000 INCHES NOMINAL |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 1.000 INCHES NOMINAL |
| AMQZ | COMPRESSED LENGTH | 6.000 INCHES NOMINAL |
| ATEM | EXTENDED LENGTH | 7.000 INCHES NOMINAL |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| BGST | PRESSURE RATING | 250.0 POUNDS PER SQUARE INCH NOMINAL |
| CKRM | INTEGRAL VALVE OPERATION METHOD | HYDRAULIC |
| CKSD | DESIGN CHARACTERISTICS | DOUBLE ACTING SINGLE CYLINDER |
| CKSF | FIRST PISTON ROD END STYLE | EXTERNAL THREADED |
| CKSG | FIRST PISTON ROD END THREAD SERIES DESIGNATOR | UNF |
| CKSH | FIRST PISTON ROD END THREAD DIAMETER | 0.500 INCHES NOMINAL |
| CKSJ | FIRST PISTON ROD END THREAD QUANTITY PER INCH | 20 |
| CKSK | FIRST PISTON ROD END THREAD CLASS | 2A |
| CKSL | FIRST PISTON ROD END THREAD DIRECTION | RIGHT-HAND |
| CLML | MOUNTING TYPE AND LOCATION | FORK CYLINDER HEAD END |
| CLMQ | MOUNTING FACILITY DIAMETER | 0.500 INCHES NOMINAL |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 0.750 INCHES NOMINAL |
| CLMS | PORT LOCATION AND QUANTITY | 1 CYLINDER HEAD END |
| CLMS | PORT LOCATION AND QUANTITY | 1 PISTON ROD END |
| CLMT | PORT STYLE | GASKET SEAL |
| CLMW | PORT THREAD SERIES DESIGNATOR | NPT |
| CLMZ | PORT NOMINAL PIPE THREAD SIZE | 0.250 INCHES |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
