SDR6058 TX Part by Solid State Devices Inc with NSN 5961-01-466-7199 - Request a Quote Now

Part Number:  SDR6058 TX
Manufacturer:  solid state devices inc
CAGE Code:  30043
NIIN:  014667199
INC Code:  20589
Country:  USA
NCB Code:  01

For competitive procurement options on part number SDR6058 TX from Solid State Devices Inc (CAGE Code 30043), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number SDR6058 TX Details:

Part number SDR6058 TX is manufactured by Solid State Devices Inc and listed with the item name Semiconductor Device Diode. Classified under NSN 5961-01-466-7199, the NIIN of this item is 014667199, its INC is 20589, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5961 Semiconductor Devices and Associated Hardware. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SDR6058 TX

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Get Started on Procurement

  1. Complete an RFQ Form: Fill out this form for part SDR6058 TX with details on your operational requirements, including your target quantity and expected turnaround time.
  2. Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
  3. Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number SDR6058 TX with NSN 5961-01-466-7199, 5961014667199

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5961-01-466-7199

Item PartTypeName:

SEMICONDUCTOR DEVICE,DIODE

59610146671990NA
CIICHCCESDPMICCriticalityENAC
UAA0
Part NumberISCRNVCRNCCHCCMSDSSADC
206656-1593

Characteristics Data of NSN 5961-01-466-7199, 5961014667199

MRCCriteriaCharacteristic
ABBHINCLOSURE MATERIALMETAL"
ABHPOVERALL LENGTH0.800 INCHES MAXIMUM"
ABJTTERMINAL LENGTH0.600 INCHES MAXIMUM"
ABMKOVERALL WIDTH0.437 INCHES MAXIMUM"
AGAVEND ITEM IDENTIFICATIONE/IFSCMIR SENSOR ASSEMBLY"
AKPVMOUNTING FACILITY QUANTITY1"
AXGYMOUNTING METHODTHREADED HOLE"
CTMZSEMICONDUCTOR MATERIALSILICON"
CTQNVOLTAGE RATING IN VOLTS PER CHARACTERISTIC500.0 MAXIMUM REVERSE VOLTAGE, PEAK AND 500.0 MAXIMUM REVERSE VOLTAGE, INSTANTANEOUS AND 350.0 MAXIMUM REVERSE VOLTAGE, TOTAL RMS"
CTQXCURRENT RATING PER CHARACTERISTIC15.00 AMPERES FORWARD CURRENT, TOTAL RMS MEGAHERTZ AND 60.00 AMPERES SOURCE CUTOFF CURRENT OUTSIDE DIAMETER"
CTRDPOWER RATING PER CHARACTERISTIC41.0 WATTS SMALL-SIGNAL OUTPUT POWER, COMMON-BASE PRESET"
CTRGCAPACITANCE RATING IN PICOFARADS150.0 MAXIMUM"
CTSGMAXIMUM OPERATING TEMP PER MEASUREMENT POINT-65.0 DEG CELSIUS CASE AND 175.0 DEG CELSIUS CASE"
TESTTEST DATA DOCUMENT0AF43-206656 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GE"
TTQYTERMINAL TYPE AND QUANTITY1 UNTHREADED HOLE"
ABBHINCLOSURE MATERIALMETAL"
ABHPOVERALL LENGTH0.800 INCHES MAXIMUM"
ABJTTERMINAL LENGTH0.600 INCHES MAXIMUM"
ABMKOVERALL WIDTH0.437 INCHES MAXIMUM"
AGAVEND ITEM IDENTIFICATIONE/IFSCMIR SENSOR ASSEMBLY"
AKPVMOUNTING FACILITY QUANTITY1"
AXGYMOUNTING METHODTHREADED HOLE"
CTMZSEMICONDUCTOR MATERIALSILICON"
CTQNVOLTAGE RATING IN VOLTS PER CHARACTERISTIC500.0 MAXIMUM REVERSE VOLTAGE, PEAK AND 500.0 MAXIMUM REVERSE VOLTAGE, INSTANTANEOUS AND 350.0 MAXIMUM REVERSE VOLTAGE, TOTAL RMS"
CTQXCURRENT RATING PER CHARACTERISTIC15.00 AMPERES FORWARD CURRENT, TOTAL RMS MEGAHERTZ AND 60.00 AMPERES SOURCE CUTOFF CURRENT OUTSIDE DIAMETER"
CTRDPOWER RATING PER CHARACTERISTIC41.0 WATTS SMALL-SIGNAL OUTPUT POWER, COMMON-BASE PRESET"
CTRGCAPACITANCE RATING IN PICOFARADS150.0 MAXIMUM"
CTSGMAXIMUM OPERATING TEMP PER MEASUREMENT POINT-65.0 DEG CELSIUS CASE AND 175.0 DEG CELSIUS CASE"
TESTTEST DATA DOCUMENT0AF43-206656 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GE"
TTQYTERMINAL TYPE AND QUANTITY1 UNTHREADED HOLE"



Thank you for visiting Just Parts Unlimited!

Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top