ET-94200 Part by Spd Electrical Systems Inc with NSN 5925-01-311-8328 - Request a Quote Now

Part Number:  ET-94200
Manufacturer:  spd electrical systems inc
CAGE Code:  30086
NIIN:  013118328
Item Name :  circuit breaker
INC Code:  00136
Country:  USA
NCB Code:  01

For competitive procurement options on part number ET-94200 from Spd Electrical Systems Inc (CAGE Code 30086), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number ET-94200 Details:

Part number ET-94200 is manufactured by Spd Electrical Systems Inc and listed with the item name Circuit Breaker. Classified under NSN 5925-01-311-8328, the NIIN of this item is 013118328, its INC is 00136, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5925 Circuit Breakers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for ET-94200

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Get Started on Procurement

  1. Complete an RFQ Form: Fill out this form for part ET-94200 with details on your operational requirements, including your target quantity and expected turnaround time.
  2. Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
  3. Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number ET-94200 with NSN 5925-01-311-8328, 5925013118328

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5925-01-311-8328

Item PartTypeName:

CIRCUIT BREAKER

59250131183280P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
ET-94200525

Characteristics Data of NSN 5925-01-311-8328, 5925013118328

MRCCriteriaCharacteristic
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE
BBRGSTORAGE TYPEGENERAL PURPOSE WAREHOUSE
CPRFOPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS240.0 AC ALL LOCATIONS
CPRLTRIP RELEASE CHARACTERISTICINSTANTANEOUS ALL LOCATIONS
CPRQRESET METHODMANUAL
CPRRMAIN CONTACT TRIPPING MECHANISM TYPETRIP FREE
CPRWACTUATOR FUNCTIONTRIP-RESET
AAQLBODY STYLEMULTIPOLE-SINGLE ACTUATOR TYPE
CPLMMAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE15.0 AMPERES AC ALL LOCATIONS
CPRGMAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS15000.0 AC ALL LOCATIONS
CPRZAUXILIARY SWITCH FUNCTION AND QUANTITY2 ALARM
CQSMSWITCH LOCATION AND POSITION DESIGNATIONINTERNAL BETWEEN POLE TWO AND THREE
CQXFINCLOSURE PROTECTION TYPE FOR WHICH DESIGNEDFUNGUS PROOF AND GENERAL PURPOSE
ADAQBODY LENGTH5.984 INCHES MINIMUM AND 6.015 INCHES MAXIMUM
ADATBODY WIDTH4.484 INCHES MINIMUM AND 4.516 INCHES MAXIMUM
AEBPCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH5.109 INCHES MINIMUM AND 5.141 INCHES MAXIMUM
AEBQCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH1.484 INCHES MINIMUM AND 1.516 INCHES MAXIMUM
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.164 INCHES NOMINAL
AEBYDISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH4.578 INCHES MINIMUM AND 4.610 INCHES MAXIMUM
AEGJSWITCH CONTACT ARRANGEMENTSINGLE POLE,DOUBLE THROW
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH1.484 INCHES MINIMUM AND 1.516 INCHES MAXIMUM
AJECBOSS HEIGHT0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
AJWXMOUNTING SURFACE TO TERMINAL END DISTANCE3.984 INCHES MINIMUM AND 4.015 INCHES MAXIMUM
AKPXPOLE QUANTITY3
CPRHCIRCUIT PROTECTION TYPEOVERCURRENT ALL LOCATIONS
CPRJTRIP RELEASE METHODTHERMAL-MAGNETIC ALL LOCATIONS
CPRNULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT125.0 ALL LOCATIONS
CPRTMANUAL ACTUATOR TYPE AND QUANTITY1 TOGGLE
CPRXACTUATOR POSITION DESIGNATIONAT POLE TWO
CRCFTRIP RELEASE AMBIENT TEMP RATING40.0 DEG CELSIUS NOMINAL ALL LOCATIONS
CRTKSWITCH TERMINAL TYPEWIRE LEAD
CWJKCASE MATERIALPLASTIC
FEATSPECIAL FEATURESINCLUDES 3 TULIP CONNECTORS FOR LINE SIDE AND 3 TULIP CONNECTORS FOR LOAD SIDE
FREQFREQUENCY IN HERTZ60.0 ALL LOCATIONS
TTQYTERMINAL TYPE AND QUANTITY6 COMPRESSION



Thank you for visiting Just Parts Unlimited!

Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top