D86SRC Part by Spectrum Control Inc with NSN 6210-00-316-1290 - Request a Quote Now

Part Number:  D86SRC
Manufacturer:  spectrum control inc
CAGE Code:  13050
NIIN:  003161290
Item Name :  lens light
INC Code:  29939
Country:  USA
NCB Code:  00

For competitive procurement options on part number D86SRC from Spectrum Control Inc (CAGE Code 13050), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number D86SRC Details:

Part number D86SRC is manufactured by Spectrum Control Inc and listed with the item name Lens Light. Classified under NSN 6210-00-316-1290, the NIIN of this item is 003161290, its INC is 29939, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 62 Lighting Fixtures and Lamps and Class (FSC) 6210 Indoor and Outdoor Electric Lighting Fixtures. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for D86SRC

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Get Started on Procurement

  1. Complete an RFQ Form: Fill out this form for part D86SRC with details on your operational requirements, including your target quantity and expected turnaround time.
  2. Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
  3. Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number D86SRC with NSN 6210-00-316-1290, 6210003161290

NSNFSCNIINCLSHazmatDEMILCancelled NSN
6210-00-316-1290

Item PartTypeName:

LENS,LIGHT

62100031612900N
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
D86BRC11CA

Characteristics Data of NSN 6210-00-316-1290, 6210003161290

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2B
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.137 INCHES MINIMUM AND 0.142 INCHES MAXIMUM
ABFEHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTIONHEAT RESISTANT AND RADIO FREQUENCY RADIATION SUPPRESSIVE
ABHPOVERALL LENGTH0.500 INCHES MAXIMUM
ACUPMOUNTING DEVICE QUANTITY1
ADAVOVERALL DIAMETER0.515 INCHES NOMINAL
AETZEFFECTIVE DIAMETER0.416 INCHES NOMINAL
AXGYMOUNTING METHODINTERNAL THREAD
BZRRTHREAD SERIESUNEF
CQHKLIGHT TRANSMISSION DESIGNTRANSPARENT LENS
CQRNTHREAD QUANTITY32 PER INCH
CQSCHOLDER SURFACE TREATMENTANODIZE
CRCKTHREAD DIAMETER0.375 INCHES
CSPDHOLDER SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
HUESCOLORRED LENS
HUESCOLORSILVER HOLDER
MATTMATERIALALUMINUM HOLDER
MATTMATERIALPLASTIC POLYCARBONATE LENS
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/3 FED SPEC SINGLE MATERIAL RESPONSE HOLDER
SFCDSURFACE CONDITIONSMOOTH BACK
SFCDSURFACE CONDITIONSMOOTH FACE
STYLSTYLE DESIGNATORCYLINDRICAL



Thank you for visiting Just Parts Unlimited!

Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top