3040-2011-0319 Part by Tech Etch Inc with NSN 5999-01-052-3513 - Request a Quote Now

Part Number: 3040-2011-0319

Manufacturer: tech etch inc

NSN: 5999-01-052-3513

CAGE Code: 64411

NIIN: 010523513

Item Name : shielding gasket electronic

INC Code: 20281

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

FSC: 5999 Miscellaneous Electrical and Electronic Components

For competitive procurement options on part number 3040-2011-0319 from Tech Etch Inc (CAGE Code 64411), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 3040-2011-0319 Details:

Part number 3040-2011-0319 is manufactured by Tech Etch Inc and listed with the item name Shielding Gasket Electronic. Classified under NSN 5999-01-052-3513, the NIIN of this item is 010523513, its INC is 20281, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5999 Miscellaneous Electrical and Electronic Components. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 3040-2011-0319

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 3040-2011-0319 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 3040-2011-0319 with NSN 5999-01-052-3513, 5999010523513

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5999-01-052-3513 Item PartTypeName: SHIELDING GASKET,ELECTRONIC	5999	010523513	0	P	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
2016-00295-10	6	9	5

Characteristics Data of NSN 5999-01-052-3513, 5999010523513

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	26.000 INCHES NOMINAL
ABMK	OVERALL WIDTH	21.062 INCHES NOMINAL
ADUE	APERTURE WIDTH	19.375 INCHES NOMINAL
ADUF	APERTURE LENGTH	24.438 INCHES NOMINAL
ADUZ	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	6.750 INCHES NOMINAL
ADVD	OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.375 INCHES NOMINAL
ADVE	OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.375 INCHES NOMINAL
ADVM	CROSS-SECTIONAL THICKNESS	0.750 INCHES NOMINAL
AECS	BOLT HOLE QUANTITY	16
BYWW	SMALLEST BOLT HOLE DIAMETER	0.343 INCHES NOMINAL
BYWX	LARGEST BOLT HOLE DIAMETER	0.437 INCHES NOMINAL
CTNJ	ENVIRONMENTAL PROTECTION MATERIAL LOCATION	AT CORNER PIECES
MATT	MATERIAL	RUBBER CHLOROPRENE CLASS CR ENVIRONMENTAL SEAL
MATT	MATERIAL	STEEL AND COPPER ALLOY EMI/RFI CONDUCTOR