SMI-14F2HRSLDM30 Part by U S Components Inc with NSN 5935-00-809-4602 - Request a Quote Now

Part Number:  SMI-14F2HRSLDM30
Manufacturer:  u s components inc
CAGE Code:  97954
NIIN:  008094602
INC Code:  01938
Country:  USA
NCB Code:  00

For competitive procurement options on part number SMI-14F2HRSLDM30 from U S Components Inc (CAGE Code 97954), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number SMI-14F2HRSLDM30 Details:

Part number SMI-14F2HRSLDM30 is manufactured by U S Components Inc and listed with the item name Connector Plug Electrical. Classified under NSN 5935-00-809-4602, the NIIN of this item is 008094602, its INC is 01938, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5935 Connectors Electrical. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SMI-14F2HRSLDM30

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Get Started on Procurement

  1. Complete an RFQ Form: Fill out this form for part SMI-14F2HRSLDM30 with details on your operational requirements, including your target quantity and expected turnaround time.
  2. Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
  3. Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number SMI-14F2HRSLDM30 with NSN 5935-00-809-4602, 5935008094602

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-00-809-4602

Item PartTypeName:

CONNECTOR,PLUG,ELECTRICAL

59350080946020PA
CIICHCCESDPMICCriticalityENAC
UAG
Part NumberISCRNVCRNCCHCCMSDSSADC
SMI-14F2HRSLDM30223

Characteristics Data of NSN 5935-00-809-4602, 5935008094602

MRCCriteriaCharacteristic
AAJFTHREAD DIRECTIONRIGHT-HAND
AAQLBODY STYLEHOOD,TOP OPENING W/CLAMP
ABMKOVERALL WIDTH0.688 INCHES NOMINAL
ADZCENVIRONMENTAL PROTECTIONSHOCK RESISTANT AND VIBRATION RESISTANT
AFRTSHELL TYPEHOOD,TOP OPENING
AGTXCABLE OPENING LENGTH0.438 INCHES NOMINAL
AKMGNOMINAL THREAD LENGTH0.109 INCHES
AWTNOPERATING TEMP RATING450.0 DEG FAHRENHEIT MAXIMUM
CBBLFEATURES PROVIDEDPRE-TINNED TERMINAL
CQTMTERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204 MIL SPEC 1ST TREATMENT RESPONSE AND QQ-S-365 FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CSCFTERMINAL TYPESOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
CSWMSHELL SURFACE TREATMENTANODIZE
CTBCSHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
CTKLINSERT MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-19833,TYPE GDI-30 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
CXCGINCLUDED CONTACT QUANTITY14 SINGLE MATING END SINGLE CONTACT GROUPING
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD AND CONTACT SURFACES SILVER
PMWTPRECIOUS MATERIAL AND WEIGHT0.014 GOLD GRAINS,TROY AND 0.014 SILVER GRAINS,TROY
PRMTPRECIOUS MATERIALGOLD AND SILVER
AAJDTHREAD CLASS2A AND 2B
ABHPOVERALL LENGTH1.000 INCHES NOMINAL
ABKWOVERALL HEIGHT1.813 INCHES NOMINAL
AFQRTHREADED DEVICE TYPECOUPLING FACILITY
AFQWMATING END QUANTITY1
AFQXCONTACT POSITION ARRANGEMENT STYLE14 SINGLE MATING END
AFQZCONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRCCONTACT MAXIMUM CURRENT RATING IN AMPS7.5 SINGLE MATING END SINGLE CONTACT GROUPING
AFRDCONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS485.0 SINGLE MATING END SINGLE CONTACT GROUPING
AFRNPOLARIZATION METHODJACKSCREW
AFRVCONNECTOR LOCKING METHODJACKSCREW-SOCKET
AFRWCONNECTOR CABLE STRAIN RELIEF METHODCABLE CLAMP
AGTYCABLE OPENING WIDTH0.250 INCHES NOMINAL
CMLPTHREAD QUANTITY PER INCH32
CQJXNOMINAL THREAD SIZE0.138 INCHES
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CQZGINSERT MATERIALPLASTIC DIALLYL PHTHALATE GLASS FILLED SINGLE MATING END
CSPTSHELL MATERIALALUMINUM
CXCLINCLUDED CONTACT TYPEROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
THSDTHREAD SERIES DESIGNATORUNC



Thank you for visiting Just Parts Unlimited!

Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top