313-00H-10K Part by Vamistor Corp with NSN 5905-00-088-5596 - Request a Quote Now

Part Number:  313-00H-10K
Manufacturer:  vamistor corp
CAGE Code:  0EBU2
NIIN:  000885596
INC Code:  37406
Country:  USA
NCB Code:  00

For competitive procurement options on part number 313-00H-10K from Vamistor Corp (CAGE Code 0EBU2), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 313-00H-10K Details:

Part number 313-00H-10K is manufactured by Vamistor Corp and listed with the item name Resistor Variable Wire Wound Non. Classified under NSN 5905-00-088-5596, the NIIN of this item is 000885596, its INC is 37406, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5905 Resistors. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 313-00H-10K

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Get Started on Procurement

  1. Complete an RFQ Form: Fill out this form for part 313-00H-10K with details on your operational requirements, including your target quantity and expected turnaround time.
  2. Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
  3. Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 313-00H-10K with NSN 5905-00-088-5596, 5905000885596

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-088-5596

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

59050008855960NB
CIICHCCESDPMICCriticalityENAC
UBA0
Part NumberISCRNVCRNCCHCCMSDSSADC
135-13103-003525

Characteristics Data of NSN 5905-00-088-5596, 5905000885596

MRCCriteriaCharacteristic
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
ADAUBODY HEIGHT0.510 INCHES MAXIMUM
CSDLSTANDARD TAPER CURVE PER SECTIONA SINGLE SECTION
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER200.0 SINGLE SECTION
CQCCELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS SINGLE SECTION
ADATBODY WIDTH0.197 INCHES MAXIMUM
APXHTERMINAL LOCATIONREAR END
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.5 FREE AIR SINGLE SECTION
ABHPIII OVERALL LENGTH0.540 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.060 INCHES NOMINAL
AKPVMOUNTING FACILITY QUANTITY2
AEDXSHAFT STYLEROUND, SLOTTED
ABXFSHAFT LENGTH0.030 INCHES MAXIMUM
ABTBMOUNTING HOLE DIAMETER0.093 INCHES NOMINAL
AXGYMOUNTING METHODUNTHREADED HOLE
CBBLFEATURES PROVIDEDNONMETALLIC SHAFT
AGTPLATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.530 INCHES MAXIMUM
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION15120.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE7.50 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE7.50 INCH-OUNCES
TTQYTERMINAL TYPE AND QUANTITY3 WIRE LEAD
AAPNSECTION QUANTITY1
TESTTEST DATA DOCUMENT10001-59A5A267-6 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
ADAQBODY LENGTH0.510 INCHES MAXIMUM
AAQLBODY STYLERECTANGULAR W/MOUNTING HOLES
AARGRELIABILITY INDICATORNOT ESTABLISHED
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG15120.0 NOMINAL
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-50.0 TO 50.0 SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION



Thank you for visiting Just Parts Unlimited!

Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top