301-153HSCT10K Part by Vamistor Corp with NSN 5905-00-185-9381 - Request a Quote Now

Part Number: 301-153HSCT10K

Manufacturer: vamistor corp

NSN: 5905-00-185-9381

CAGE Code: 0EBU2

NIIN: 001859381

Item Name : resistor variable w

INC Code: 37406

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

FSC: 5905 Resistors

For competitive procurement options on part number 301-153HSCT10K from Vamistor Corp (CAGE Code 0EBU2), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 301-153HSCT10K Details:

Part number 301-153HSCT10K is manufactured by Vamistor Corp and listed with the item name Resistor Variable W. Classified under NSN 5905-00-185-9381, the NIIN of this item is 001859381, its INC is 37406, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5905 Resistors. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 301-153HSCT10K

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 301-153HSCT10K with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 301-153HSCT10K with NSN 5905-00-185-9381, 5905001859381

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-00-185-9381 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON	5905	001859381	0	N	B
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		B	U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
301-153HSCT10K	2	9	5

Characteristics Data of NSN 5905-00-185-9381, 5905001859381

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1
AAQL	BODY STYLE	RECTANGULAR W/MOUNTING HOLES
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABHP	OVERALL LENGTH	0.535 INCHES NOMINAL
ABJT	TERMINAL LENGTH	0.187 INCHES NOMINAL
ABKW	OVERALL HEIGHT	0.500 INCHES NOMINAL
ABMK	OVERALL WIDTH	0.442 INCHES NOMINAL
ABTB	MOUNTING HOLE DIAMETER	0.078 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.060 INCHES NOMINAL
ABXF	SHAFT LENGTH	0.035 INCHES NOMINAL
ADAQ	BODY LENGTH	0.500 INCHES NOMINAL
ADAT	BODY WIDTH	0.255 INCHES NOMINAL
ADAU	BODY HEIGHT	0.500 INCHES NOMINAL
AEDX	SHAFT STYLE	ROUND,SLOTTED
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFK	MAXIMUM STARTING TORQUE	7.50 INCH-OUNCES
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.200 INCHES NOMINAL
AFJN	FRAGILITY FACTOR	MODERATELY DELICATE
AGTP	LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.520 INCHES NOMINAL
AKPV	MOUNTING FACILITY QUANTITY	2
APXH	TERMINAL LOCATION	LEFT ADJACENT SIDE SINGLE ROW
AXGY	MOUNTING METHOD	TERMINAL AND UNTHREADED HOLE
AYQR	CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS	0.100 INCHES NOMINAL
CQCC	ELECTRICAL RESISTANCE PER SECTION	10.0 KILOHMS SINGLE SECTION
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	16200.0 NOMINAL
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.100 INCHES NOMINAL
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	1.0 FREE AIR SINGLE SECTION
CRJS	FIXED TAP QUANTITY PER SECTION	1 SINGLE SECTION
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
CSBW	TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS	5000.0 SINGLE SECTION
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	50.0 SINGLE SECTION
TEST	TEST DATA DOCUMENT	94271-301-153HSCT DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN