301-00H25K Part by Vamistor Corp with NSN 5905-00-722-3825 - Request a Quote Now

Part Number: 301-00H25K

Manufacturer: vamistor corp

NSN: 5905-00-722-3825

CAGE Code: 0EBU2

NIIN: 007223825

Item Name : resistor variable w

INC Code: 37406

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

FSC: 5905 Resistors

For competitive procurement options on part number 301-00H25K from Vamistor Corp (CAGE Code 0EBU2), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 301-00H25K Details:

Part number 301-00H25K is manufactured by Vamistor Corp and listed with the item name Resistor Variable W. Classified under NSN 5905-00-722-3825, the NIIN of this item is 007223825, its INC is 37406, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5905 Resistors. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 301-00H25K

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 301-00H25K with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 301-00H25K with NSN 5905-00-722-3825, 5905007223825

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-00-722-3825 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON	5905	007223825	0	N	B
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		B	U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
301-00H25K	5	9	5

Characteristics Data of NSN 5905-00-722-3825, 5905007223825

MRC	Criteria	Characteristic
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS
ADAQ	BODY LENGTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	50.0 SINGLE SECTION
ADAU	BODY HEIGHT	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	1.0 FREE AIR SINGLE SECTION
CSDL	STANDARD TAPER CURVE PER SECTION	A SINGLE SECTION
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
CQCC	ELECTRICAL RESISTANCE PER SECTION	25.000 KILOHMS SINGLE SECTION
ABHP	III OVERALL LENGTH	0.540 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.060 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
AXGY	MOUNTING METHOD	TERMINAL
AEDX	SHAFT STYLE	ROUND, SLOTTED
ADAT	BODY WIDTH	0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
ABXF	SHAFT LENGTH	0.040 INCHES MAXIMUM
ABTB	MOUNTING HOLE DIAMETER	0.070 INCHES MINIMUM AND 0.076 INCHES MAXIMUM
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN
APXH	TERMINAL LOCATION	LEFT ADJACENT SIDE SINGLE ROW
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.097 INCHES MINIMUM AND 0.103 INCHES MAXIMUM
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.200 INCHES NOMINAL
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION
AGTP	LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.519 INCHES NOMINAL
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	15876.0 NOMINAL
AEFK	MAXIMUM STARTING TORQUE	7.50 INCH-OUNCES
ABMK	III OVERALL WIDTH	0.274 INCHES NOMINAL
AAPN	SECTION QUANTITY	1
AAQL	BODY STYLE	RECTANGULAR W/MOUNTING HOLES
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABJT	TERMINAL LENGTH	0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM
ABKW	III OVERALL HEIGHT	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	16200.0 NOMINAL