JM39015 3 007XR Part by Vernitron Corp with NSN 5905-01-070-3508 - Request a Quote Now

Part Number: JM39015 3 007XR

Manufacturer: vernitron corp

NSN: 5905-01-070-3508

CAGE Code: 84048

NIIN: 010703508

Item Name : resistor variable w

INC Code: 37406

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

FSC: 5905 Resistors

For competitive procurement options on part number JM39015 3 007XR from Vernitron Corp (CAGE Code 84048), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number JM39015 3 007XR Details:

Part number JM39015 3 007XR is manufactured by Vernitron Corp and listed with the item name Resistor Variable W. Classified under NSN 5905-01-070-3508, the NIIN of this item is 010703508, its INC is 37406, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5905 Resistors. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for JM39015 3 007XR

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part JM39015 3 007XR with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number JM39015 3 007XR with NSN 5905-01-070-3508, 5905010703508

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-070-3508 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON	5905	010703508		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
010726023	B	1	5

Characteristics Data of NSN 5905-01-070-3508, 5905010703508

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1
AAQL	BODY STYLE	RECTANGULAR
AARG	RELIABILITY INDICATOR	ESTABLISHED
AARH	RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.010
ABHP	OVERALL LENGTH	0.455 INCHES NOMINAL
ABJT	TERMINAL LENGTH	0.172 INCHES MINIMUM
ABKW	OVERALL HEIGHT	0.720 INCHES MAXIMUM
ABMK	OVERALL WIDTH	0.170 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.065 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
ABXF	SHAFT LENGTH	0.050 INCHES MAXIMUM
ADAQ	BODY LENGTH	0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
ADAT	BODY WIDTH	0.145 INCHES MINIMUM AND 0.185 INCHES MAXIMUM
ADAU	BODY HEIGHT	0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
AEDX	SHAFT STYLE	ROUND,SLOTTED
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	3600.0 MINIMUM AND 9000.0 MAXIMUM
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
AFJN	FRAGILITY FACTOR	MODERATELY DELICATE
APXH	TERMINAL LOCATION	LOWER ADJACENT SIDE SINGLE ROW
AXGY	MOUNTING METHOD	TERMINAL
CBME	CUBIC MEASURE	0.027 CUBIC INCHES
CQCC	ELECTRICAL RESISTANCE PER SECTION	1.0 KILOHMS SINGLE SECTION
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	3600.0 MINIMUM AND 9000.0 MAXIMUM
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.75 FREE AIR SINGLE SECTION
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION
TEST	TEST DATA DOCUMENT	81349-MIL-R-39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN
ZZZK	SPECIFICATION/STANDARD DATA	81349-MIL-R-39015/3 GOVERNMENT SPECIFICATION